1.5inch RGB OLED Screen Display Module SSD1351 Driver 128X128 16-bit High Color Display Supports for Raspberry Pi /Arduino/STM32
This is a general RGB OLED display Module, 1.5inch diagonal, 128×128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.
Features:
128×128 high resolution, 65K colors, clearly displays colorful images
Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
Specifications:
Driver: SSD1351
Interface: 4-wire SPI, 3-wire SPI
Display color: RGB, 65K colors
Resolution: 128×128
Viewing angle: >160°
Operating voltage: 3.3V / 5V
Dimension: 44.5 x 37 (mm)
Interface:
Port Description
VCC Power (3.3~5V input)
GND Ground
DIN Data input
CLK Clock data input
CS Chip selection, low active
DC 4-wire SPI: Data/Command selection (high for data, low for command)
3-wire SPI: Connects to GND, keeps low
RST Reset, low active
There are two available drive interfaces for this RGB OLED module: 4-wire SPI (default) and 3-wire SPI:
BS DC
4-wire SPI 0 DC
3-wire SPI 1 Connects to GND
Package Includes:
1 X 1.5inch OLED Display Module
1 X PH2.0 7P dupond cable
