1.8 inch Full Color 128×160 SPI Full Color TFT LCD Display Module ST7735S 3.3V Replace OLED Power Supply for Arduino
Product parameters:
Size :1.8 inches
Display mode: a-TFT
Display format: Graphics 128RGB * 160 point matrix Input data SPI interface driver IC ST7735S
Overall dimensions: 35 (W) * 56 (H) * 3.45 +/- 0.1 (T) mm
Resolution: 128RGB * 160 points
LCD active area: 28.03 (W) * 35.04 (H)
Pixel size: 0.219 (W) * 0.219 (H)
Operating temperature: -20 ~ 70°C2.
PIN description: PIN code symbol
Instructions:
1.GND ground
2. VCC power supply
3. 3V3 SCL serial clock pin.
4.SDA serial data input
5. RES LCM reset pin This pin is the reset signal input. When the pin is low voltage, chip initialization is performed. Keep this pin high during normal operation.
6. DC data/Command Control 7 CS chip Select 8 BLK backlight control pin
Packing list: 1 x 1.8 “TFT LCD SPI serial port module
