Features:
1.Load the default human body sensing configuration, plug and play
2.Provide visualization tools that support configuring detection distance intervals, setting sensitivity between partitions, and reporting time of results
3.Support induction range division and completely shield any interference outside the range
4.Sensing at a close range of 0.2m, without detection blind spots
5.The farthest sensing distance of the human body during exercise is 8m
6.Independent configuration for triggering and maintaining status, with strong anti-interference ability
7.Support multiple installation methods such as ceiling and wall mounting
8.Equipped with single chip intelligent millimeter wave sensor SoC and intelligent algorithm firmware
Product Introduction
HLK-LD2420 is a high-performance 24 GHz one transmitter, one receiver radar module from Hailingke. Its human body sensing algorithm adopts millimeter wave radar distance measurement technology and advanced proprietary signal processing technology of the S3 series chip, achieving precise perception of motion, micro motion, and standing human bodies. HLK-LD2420 is mainly used to perceive whether there is movement or micro movement of the human body in the indoor scene perception area, and to refresh the detection results in real-time. It has a maximum sensing distance of 8m for the moving human body, and can easily configure the sensing distance range, sensing sensitivity and refresh time for different intervals. It supports GPIO and UART interfaces, plug and play, and is flexibly applied to different intelligent scenarios and terminal products.
Parameters:
Model: HLK-2410S
Size: 20x20mm
Output model category: Digital sensor
Working principle: magnetic sensor
Frequency: 24G-24.25GHz
Modulation method: FMCW
Detection distance: 0.75-6m adjustable
Detection angle: ± 60 °
Power supply: 3.3V (Typ.)
Current:~50mA
Output serial port level: 3.3V
Sweep bandwidth: 250MHz
Environmental temperature: -40 ° C~+85 ° C
Data format: serial port ASCIl output/high and low level 3.3V&0V
Packaging form: with pins
Applicable scenario: Intelligent light control/advertising screen sensing
Matters needing attention
If a radar needs to be equipped with a casing, the casing must have good wave transmission characteristics in the 24GHz frequency band and must not contain metals or materials that have a shielding effect on electromagnetic waves;
2.This product needs to be installed in a suitable environment. If used in the following environments, the detection effect will be affected:
2.1 There are continuously moving non-human objects in the sensing area, such as animals, continuously swinging curtains, and large green plants facing the air vent.
2.2 There is a large area of strong reflection plane in the sensing area, and the strong reflection object directly facing the radar antenna can cause interference.
2.3 When installing on the wall, it is necessary to consider external Confounding such as air conditioners and electric fans on the top of the room.
3. Precautions during installation
3.1 Try to ensure that the radar antenna is directly facing the area to be detected, and that the surrounding area of the antenna is open and unobstructed.
3.2 To ensure that the installation position of the sensor is firm and stable, the shaking of the radar itself will affect the detection effect.
3.3 Ensure that there is no object movement or vibration on the back of the radar. Due to the penetrability of radar waves, the antenna back lobe may detect moving objects on the back of the radar. Metal shielding covers or metal backplates can be used to shield the radar back lobe and reduce the impact of objects on the back of the radar.
When there are multiple 24GHz frequency band radars, please do not align the beams and try to install them as far away as possible to avoid possible mutual interference.
4.Power precautions: The input voltage of the power supply is 3.0V~3.6V, and there is no obvious spectral peak within 100 kHz of the power supply ripple. This plan is for reference
For design purposes, users need to consider corresponding electromagnetic compatibility designs such as ESD and lightning surges.
Package include:
Package 1:
Sensor module * 1
Connection line * 1
Serial port board
Package 2:
Sensor module * 1
4 GREAT REASONS TO BUY FROM US:
- Over 37,000 happy customers worldwide
- Real people on our support team ready to help
- The finest materials and stunning design — all our products are developed with an obsessive dedication to quality, durability, and functionality
- We use the most secure online ordering systems on the market, and are constantly improving our software to make sure we offer the highest possible security
BUY WITH CONFIDENCE
Our mission is to make your shopping experience as safe and enjoyable as possible. Have questions? Feel free to contact our award-winning customer care team for advice on everything from product specifications to order tracking.
- Money back guarantee: Something not quite right? If you’re not totally satisfied with your purchase, you can return it within 15 days for a full refund
- Risk-Free Purchase: We utilize industry-standard Secure Sockets Layer (SSL) technology to allow for the encryption of all the sensitive information, so you can be sure your details are completely safe with us
- Trustworthy payment method: We partner with the most popular online payment solutions that guarantee enhanced security and fast transaction processing
