MPPT Solar Grid Tie Inverter 500W 600W Pure Sine Wave for PV Input 16-180V or Battery 12-96V Adjustable Power Output
Upgraded the new adjustable power inverter,
Specifications:
|
Rated Power |
600W |
||||||||||
|
Input(DC) |
|||||||||||
|
PV open voltage range |
26V-45V |
39V-60V |
55V-90V |
85V-130V |
120-180V |
||||||
|
PV MAX input power(W) |
700W |
||||||||||
|
MPPT Voltage range(V) |
22-34VDC |
33-47VDC |
44V-70VDC |
66-100VDC |
90-140V |
||||||
|
MPP tracking efficiency |
>99% |
||||||||||
|
MAX.DC current(A) |
30A |
20A |
15A |
10A |
10A |
||||||
|
Suitable for Battery voltage(V) |
24V |
36V |
48V |
72V |
96V |
||||||
|
Battery Low Voltage Protection(V) |
22V |
33V |
44V |
66V |
88V |
||||||
|
Output(AC) |
|||||||||||
|
PV mode AC MAX output (W) |
600 |
||||||||||
|
Battery mode Max output power |
450W |
450W |
450W |
450W |
450W |
||||||
|
AC output range |
220VAC(190-260VAC) or 120VAC(90-135VAC) |
||||||||||
|
Frequency range |
50Hz(48~52) or 60Hz(58~62) |
||||||||||
|
Power Factor |
>98% |
||||||||||
|
THD |
<5% |
||||||||||
|
Phase Shift |
<1% |
||||||||||
|
Stable real efficiency / 120V |
87% |
88% |
89% |
89% |
91% |
||||||
|
Stable real efficiency / 220V |
88% |
89% |
91% |
92% |
94% |
||||||
|
Other electrical data |
|||||||||||
|
Protection |
Islanding; Short-circuit; Low Voltage; Over Voltage; Over temperature Protection |
||||||||||
|
Work Temperature |
‘-25°C~ 80°C |
||||||||||
|
Work Humidity |
0%~90%RH non-condensing |
||||||||||
|
Grade of Waterproof |
Outdoor design IP22 |
||||||||||
|
LED Show |
R&G&B LED |
||||||||||
|
Cooling |
Fan |
||||||||||
|
Stand-by Power |
<1W |
||||||||||
|
Matching component: |
Monocrystalline ,polycrystalline , thin-film solar panels. |
||||||||||
|
Mechanical data |
|||||||||||
|
Net Weigtht |
2.2kgs/pc |
||||||||||
|
Gross Weight |
2.5kgs/pc |
||||||||||
|
Machine size(LxWxH) |
22.2×16.2×6.5CM |
||||||||||
|
Packing Size (LxWxH) |
32x22x12CM |
||||||||||
PV grid-connected inverter operating mode:
The grid-tied inverter has an automated working order, without needing to monitor. On detection the power output from solar panels, device will decide if the power was large enough to begin the conversion process. Coversion process includes 5 modes, Startup, Grid-tied begin, Standby, Stop, Fault-find.
Startup – When the start button is on, solar panel and grid lines both connected in normal condition, inverter enters working condition.
Grid-tied begin – Grid-tied begin mode is when inverter starts to convert the Direct Current fed through from PV solar panel to a stable Alternate Current and flow to the utility grid. To enable the maximum output of energy, the device uses MPPT control technology to track sun rays, this technology promises the maximum efficiency under diferent daylight and temperature conditions.
Standby – Standby mode is when device detects insufficient power feeding through from the solar panel, or device detects abnormal status such as voltages, frequencies, and temperatures not in the permitted range, the device enters standby mode.
Stop – Insufficient sunlight hence insufficient PV power feeding through to the device and device enters into the standby mode, when this condition continues and DC voltages falls below 12V for over 1 minute, the device will enter Stop mode.
When error ocurs, fault find indicator starts flashing, device will enter Stop mode. Please see 3.4 error status on LED indicator.
Adjustable configuration panel.
Battery (battery) power output adjustment mode:
1.the adjustable knob on the inverter to the right twist,Battery power adjustment mode opens,The right of the blue LED light on,At this point the PV inverter MPPT tracking function automatically turns off,Low output machine output power of about 100W, the adjustable knob slowly twist to the right,with the output power gradually increases, the limited battery adjustable maximum output power of about 75% of the total power of the inverter (for example, 500W inverter defined variable will be around 370W, 600W inverter will be limited to 450W)
2. when the inverter is connected to the battery discharge the battery voltage is too low, The inverter will automatically stop to protect the battery output voltage is not too low,At this point you can not cut off the DC line between the inverter and battery,You can use other independent solar charge controller to the battery charge,When charging the battery is full,When 26 ~ 42V inverter connected to 24V battery:The inverter will automatically start and the net output (for example,Battery voltage into about 21V, the machine will automatically shut down, this time with another charge controller to the battery charge,When charged to about 25V, the machine will automatically begin to work), Charging without human intervention.
3.Battery (battery) mode, a plurality of sub-voltage specifications in the following table.
|
Battery voltage |
Inverter Input |
Battery Low voltage protection |
Battery high voltage protection |
|
12V battery |
16V~28V |
11V |
14.5V |
|
24V battery |
26V~45V |
21V |
29V |
|
36V battery |
40V~62V |
33V |
43.5V |
|
48V battery |
55V~90V |
44V |
58V |
|
60V battery |
48V~86V |
55V |
72.5V |
|
72V battery |
85V~130V |
66V |
87V |
|
96V battery |
120V-180V |
88V |
120V |
4 GREAT REASONS TO BUY FROM US:
- Over 37,000 happy customers worldwide
- Real people on our support team ready to help
- The finest materials and stunning design — all our products are developed with an obsessive dedication to quality, durability, and functionality
- We use the most secure online ordering systems on the market, and are constantly improving our software to make sure we offer the highest possible security
BUY WITH CONFIDENCE
Our mission is to make your shopping experience as safe and enjoyable as possible. Have questions? Feel free to contact our award-winning customer care team for advice on everything from product specifications to order tracking.
- Money back guarantee: Something not quite right? If you’re not totally satisfied with your purchase, you can return it within 15 days for a full refund
- Risk-Free Purchase: We utilize industry-standard Secure Sockets Layer (SSL) technology to allow for the encryption of all the sensitive information, so you can be sure your details are completely safe with us
- Trustworthy payment method: We partner with the most popular online payment solutions that guarantee enhanced security and fast transaction processing
