processor :Quan zhi
Brand : CERASTES
sensor : Sony imx175
waterproof level : IP68, waterproof,5meters (no waterproof case required)
WIFI : Support (Mobile APP control) (Remote control)
Display screen : 2.0inch IPS HD screen
SOS : SOS signal lamp
electric torch : Outdoor flashlight lighting
battery : 1050mAh polymer lithium battery
Lens : 170° wide-angle 6 glass lens
Video resolution :
4K(3840*2160)30/60fps,
2.7K(2704×1520)30fps,
1080P(1920*1080)30/60fps,
720P(1280*720) 60/120fps,
Stored photo resolution :
16M(4640×3480)
14M(4320×3240)
10M(3648×2736)
8M(3264×2448)
5M(2592×1944)
2M(1600×1200)
storage : Micro SD card (up to 128GB)
data connection : USB2.0/ WIFI
Charging time : About 1.5 hours
Car mode : Support
camera function : Continuous shooting, with remote control, flash, etc
Video function : Loop recording, microfilm recording, slow photography, etc
Adjustable viewing angle : Support wide and narrow viewing angles
size : Length * width * height: 63.0 * 45.5 * 25.5mm
weight : 75g
Language : English, French, German, Italian, Japanese, Spanish, Portuguese, Russian, Simplified Chinese, Traditional Chinese
Application scenarios : Extreme sports, outdoor sports, cycling, diving, driving records, security, etc.
*Note: Specification parameters may be upgraded, updated and other reasons, subject to the physical object.Use the operation
1. Insert the Micro SD card
Note: Please choose the brand MicroSD card. The ordinary neutral card can not be guaranteed for normal use. The first inserted memory card should be formatted on the camera.
2. Battery charging
A. The charger needs to select 5V2A
B. Connect the computer and the power adapter for charging.
C. Charging the car directly can also charge it on the car.
D.Video recording function while charging.(Need to set up in the menu to open the car mode)
E. Shutdown state can also be charged
3.Waterproof adhesive plug
Note: the waterproof rubber plug must be plugged tightly and pressed in place, otherwise it will affect the waterproof performance
4.Turn on and off the camera
Long press and hold the power switch for about 3 seconds to turn on / off.
5. Video mode
Turn the camera on and enter the video mode, appearing in the upper left corner of the screen Icon, indicating that the camera has been set to video mode. After pressing the “OK” key, the yellow dot in the upper left corner will start to flash as 00:00:00 to start recording. Press OK again during recording to stop recording.
6. Photo mode
After opening the camera, press Mode, select photo mode, to appear in the upper left corner of the screenIcon indicates that the camera is in photo mode. Press the OK ” to take a picture.
7. zooming
Long press the upper or down key on the video or camera interface
8. Set
A. The camera enters the camera mode, click on the “set key”, and you can select the video resolution, cycle video, vehicle mode, etc.
B. When the camera enters the photo mode, click the “Set button”, and you can select the photo size, continuous shooting, shooting method, image quality, exposure compensation and color, etc.
9. Flashlight and SOS
After opening the camera, long press the “setting button” to open the SOS, then long press the “setting button” to open the flashlight, and then long press the “setting button” to close
10. Image storage and playback
A. Use the USB cable or card reader to copy the image file in the camera to the computer.
B. Press “Mode” after opening the camera, and you can switch to the camera album to browse the stored image files.
C. Short press in the camera album interface can lock the image file, and long press can delete it.
WiFi interlinkage
This product can be connected to mobile phones (Android and IOS systems). Please follow the following steps to operate:
1. Open the camera's WiFi interface (press the side WiFi/up button), and open the phone to search for the WiFi name of the camera and connect it. The first connection requires input. The initial password is 1234567890
Note: When the phone is connected to the camera's WiFi, there will be no internet prompt to switch networks. In this case, you need to choose not to switch or cancel
2. After the WIFI connection is successful, enter the APP and click on the link camera. The connection is successful and a preview screen will be displayed