MUCAR VO7S Car Diagnostic Scanner >OE-Level Full System Diagnoses + 28 Reset Functions + Bi-directional Controls + ECU Coding+CAN-FD
1.New MUCAR VO7/VO7S diagnose all systems for all cars.
2.MUCAR VO7/VO7S 2023 newest diagnostic tool support 28 reset function free for life.
3.MUCAR VO7/VO7S obd2 scanner support ECU coding and Active teset.
4.other functions: 10 mode obd2 functions+4 in1 live data stream and so on.
5.2+32GB memory,8mp camera,7 inches screen,6000mAh battery.
6.AUTOAUTH FORFCA SGW ACCESS:
AutoAuth Certified Tool & Unlock FCA Vehicles Secure Gateway to Perform Day to Day Service.
7.VAG Guided funtions! compatible with Audi/VW/Skoda,etc.
8.Specially:MUCAR VO7S can diagnose CAN-FD protocal cars
Warm Tips
1) Before place order please check compatibility first. Send your car brand model and release year to seller.for example(Audi,A3, 2020)
2) Not 28 resets work for all cars, before place order please send your car brand, model and release year check compatibility for you.
The difference between VO6,VO7 and VO7S
Note : The only difference between VO7 and VO7S is that VO7S supports the CANFD protocol, while VO7 does not support the CANFD protocol. Their other functions are exactly the same.
Support ECU coding free for life
ECU Coding: Helps re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements.
After we replace ECU modules, defective units, or certain parts we need to do the coding to make the replaced parts being stored and recognized by the ECU. Follow the strict procedures of the manufacturer to match, learn, code, and program it until it functions normally. Warm Tips: Before coding, please read and record the original module’s information.
ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.
ECU coding helps to flash some hidden features for vehicles and disable car’s annoying functions. such as change the interior light, activate cornering headlights with fog lights, and deactivate buzzing sounds when locking the door, etc.
Support Active Test/Bi-directional control free for life
MUCAR VO7S car diagnostic tool is a bi-directional scan tool, that allows you to request information or command a module to perform specific tests and functions while observing the resulting data at the same time. Bi-directional Control (also referred to as Active Tests) function is a commonly-used function for mechanics/workshops, can save you a load of time and help you get through more jobs every day.
MUCAR VO7 Offers 28 Maintenance Services > FAST & EFFICIENT > Improve Repair Efficiency
1.Oil Lamp Reset Service
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.
2.EPB Electronic Park Brake Reset
It is important in the maintenance of electronic braking system's safety and efficiency.
3.BAT battery service
Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
4.DPF Diesel Particulate Filter Reset
Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
5.SAS Steering Angel Sensor Reset
Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.
6.TPMS Tire Pressure Monitoring System Reset
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
7.IMMO Matching
In order to prevent the car from being used by illegal keys, the IMMO matching function enables the anti-theft control system on the car to identify and authorize the remote key, so that the car can be opened and used normally. When the car changes the ignition switch key, ignition switch, integrated dashboard, engine control unit (ECU), body control module (BCM) and remote control battery, the IMMO matching is required.
8.ABS Bleeding
ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.
9.Sunroof Reset
The sunroof needs to be reset when the sunroof control unit have communication problem or changed.
10.Suspension Reset
Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.
11.Gearbox (Transmission )Reset
Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.
12.AFS Headlamp Reset
'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.
13.Injector Coding
Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.
14.Throttle Adaptation
The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.
15.Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.
16.EGR Reset
Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.
17.A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
18.Adblue Reset(Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.
19.Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator.
20.Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
21.AT Learning
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift
22.Language Change
This function is used to change the system language of the vehicle central control panel.
23.Nox Sensor Reset
Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.
24.ODO Reset
a) ODO reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage.
b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it
is necessary to do ODO reset after maintenance.
25.Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).
26.Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
27.Transport Mode
ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.
28.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.
If you can't confirm the compatibility of these features, please don't worry, we can provide the compatibility list and real-time inquiry, and you will get the accurate answer within 6 hours at the earliest.
Diagnose all car systems for all cars!
Advanced MUCAR VO7/VO7S OBD2 Scanner can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, immobilizer, gateway, steering, radio, and air conditioning This diagnostic scanner supports essential functions, such as reading ECU version info and reading data streams.
Support More Than 100+ Car Brands
Mucar VO7/VO7S diagnostic scanner has the ability to work on most vehicles after 1996 and newer OBDII-compliant vehicles.
For Amercian
for Buick, for Chrysler, for Cadillac, for Chevrolet, for Doge, for AU Ford, for Brazil Fiat, for Brazil GM, for Ford, for GM, for Jeep, for Lincoln, for SGM
For European
for Aston Martin, for Audi, for Alfa Remeo, for Abarth, for BMW, for Bentley, for Bugatti, for Citroen, for DR, for Dacia, for EU Ford, for Ferrari, for Fiat, for GAZ, for Iveco, for IZH, for Jaguar, for Land Rover, for Lamborghini, for Lancia, for Mercedes, for Maserati, for Maybach, for Mini, for Opel, for Opel (south africa), for PAZ, for Peugeot, for Porche, for Renault, for Rover, for Rolls-royce, for SAAB, for Seat, for Skoda, for Smart, for Sprinter, for UAZ, for VAZ, for Volvo, for Volkswagen, for Vauxhall, for ZAZ
For Asian
for Acura, for Daewoo, for Daihatsu, for AU Holden, for Honda, for Hyundai, for Ikco, for Isuzu, for Infiniti, for Kia, for Luxgen, for Lexus, for Mahindra (India), for Maruti (India), for Tata (India), for Mahindra, for Maruti, for Mazda, for Mitsubishi, for MVM, for Nissan, for Nissangtr, for Perodua (Malaysia), for Proton (Malaysia), for Perodua, for Proton, for Renault Samsung, for Saipa, for Ssangyong, for Subaru, for Suzuki, for Toyota, for Tlisuzu, for United Pakistan
Support 17 Languages
English, French, German, Italian, Spanish, Portuguese, Japanese, Russian, Polish, Hungarian, Arabic, Greek, Slovak, Dutch, Korean, Turkish, Czech
Full OBD2 Functions
1）Read Codes—Knows what and where the problem is according to the DTC and its definition.
2）Clear Codes—Clear the DTCs and turn off the warning lights after code reading and certain repairs.
3）Live Data—Request current powertrain diagnostic data. 4 data streams can be merged in 1 graph for easier comparison.
4）Freeze Frame—Request freeze frame information. Find the data at the time of the car failure.
5）O2 Sensor Test—Request oxygen sensor monitoring test results.
6）On-Board Monitor Test—Request on-board monitoring test results for specific monitored systems.
7）I/M Readiness—Request emission-related diagnostic trouble codes detected during current or last completed driving cycle
8）EVAP Test—Start the leak test of the vehicle's EVAP system (This tool does not perform the leak test, but sends a signal to the vehicle's on-board computer to start the test.)
9）Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10）DTC Lookup
4 IN 1 Scientific Data Management
✔ One-Touch Auto VIN: Automatically identify the vehicle, and match the proper diagnostic software to run fast and precise car diagnostics.
✔ Live data streams： supports 4 PIDs graphed (combined).
✔ DTCs Lookup： It looks up the meaning of fault codes in the DTCs library or Google online.
✔ Data Record + View History： Once a vehicle diagnosis is performed, the MUCAR VO7 scanner for car, will record every detail of the diagnostic process. you can record/review/playback live data anytime. The History function provides quick access to the tested vehicles and users can resume the last operation, without the necessity of starting from scratch.
Automotive Repair Solutions
✔ IM Online Chat — This tool allows you to ask the MUCAR team questions that you encounter in text, video, or documentation (diagnostic reports). Look up activation codes, registration information, missing accessories, etc.
✔ Remote Analysis Expert — Unresolvable repair problems and MUCAR engineers jointly diagnose the vehicle, you are responsible for the observation of the field test environment, MUCAR engineers use the equipment to diagnose and diagnose your vehicle, to provide you with diagnostic advice.
✔ Quick Check Print — Generate diagnostic reports (PDF documents) with one click within the VO7 obd scanner, turn them into files, or define them as tickets via the printer.
✔ Customer Management — Make notes and save the electronic file of the customer's diagnosis report and share it with the customer via email or Bluetooth.
AUTOAUTH FORFCA SGW ACCESS
AutoAuth Certified Tool & Unlock FCA Vehicles Secure Gateway to Perform Day to Day Service
VAG Guided funtions! compatible with Audi/VW/Skoda,etc.
MUCAR VO7S Support CAN-FD protocal!Diagnose more cars!
5 module ectensions
TPMS
Printer
Battery tester
Oscilloscope
Endoscope
(Notice:These modules require additional purchase)
Packing List
1*MUCAR VO7 Host
1*Diagnostic dongle
1*Charging cable
1*Three in one power adapter(Suitable for EU plug, US Plug and UK Plug)
