Overview
This is a USB GPS receiver that can transmit positioning data wirelessly via Bluetooth and Serial USB.
M10USB equipped with UBX-M10050-KB chipset.M10USB features the UBX-M10 standard precision GNSS platform and provides exceptional sensitivity and acquisition time for all L1 GNSS signals.M10USB supports a maximum positioning update rate of 25Hz (need to be configured in high-performance mode).M10USB is a highly cost-effective GNSS L1 solution.
The M10 platform supports concurrent reception of four GNSS (GPS, GLONASS, Galileo, and BeiDou) with QZSS SBAS enable. The high number of visible satellites enables the receiver to select the best signals. This maximizes the position availability, in particular under challenging conditions such as in deep urban canyons., and the outdoor accuracy can reach 1.5m CEP. This maximizes the position availability, in particular under challenging conditions such as in deep urban canyons. It is suitable for applications such as ship positioning, car navigation, smart agriculture, and road data collection.
The USB serial port driver of this device is PL2303GL, and the Bluetooth pairing code is 0000.
If you need to change the baud rate or other configurations, please write a note. M10USB has built-in editable flash memory, and users can personalize the receiver's configuration via the U-center software.
Parameter
Android Settings
Android App:GPS Connector
Supported GNSS constellations
M10USB is a concurrent GNSS receiver that can receive and track multiple GNSS systems. The single RF front-end architecture enables concurrent reception of multiple GNSS constellations. The receiver can be configured for a subset of GNSS constellations to achieve lower power consumption.
The factory configuration on AN3126 is concurrent reception of GPS,Galileo,GLONASS and BeiDou B1C with QZSS and SBAS enabled.
The following GNSS and their signals are supported:
Supported protocols
Dynamic platform
The dynamic platform model can be configured through the CFG-NAVSPG-DYNMODEL
configuration item. For the supported dynamic platform models and their details please refer to the table below. The default dynamic model is Portable.
Dynamic platform models and details:
Factory Settings
•GPS+Galileo+GLONASS+BeiDou+QZSS+SBAS
•115200 baud, 8 bits, no parity bit, 1 stop bit.
•1Hz navigation update rate.
•NMEA version 4.11.
•Input messages: NMEA and UBX.
•Output messages: NMEA GGA, GLL, GSA, GSV, RMC, VTG and TXT.
Configure software
Official GNSS evaluation software for Windows: U-center
Performance
Detail
