Before placing your order, please be sure to read all the instructions on the product detail page carefully. It is also recommended that you review all relevant negative reviews to fully understand the product features and make a rational purchase decision. We have repeatedly emphasized that this product is only an entry-level temperature measurement tool. Its resolution and refresh rate are relatively low, and it cannot be used for professional detection purposes.
The resolution of this product is only 32*24, which is a very low resolution, which can only be used for simple temperature measurement, and can not be used to detect the situation of floor heating, wall water leakage, water pipe leakage, etc., and can not be used for occasions with high accuracy requirements, such as repairing mobile phones.
If you need a high-precision product, don't buy it. It's just a simple cheap toy for measuring temperature.
Please note the following before purchasing：
– Not for night photography of animals;
– Not for precise temperature measurement;
– Not for detecting hotspots on circuit boards;
– Not to be used as a regular camera;
– Not for use to find hidden cameras;
– Low refresh rate (please refer to the demonstration video);
– The optimal usage distance is within 1 meter.
– Not suitable for long-distance temperature measurement.
This sensor has a total of 768 pixels (32×24). Therefore, even when aimed at a white wall, the screen interface will display multiple temperature and color differences, and the temperature value will fluctuate continuously. This is a normal phenomenon. Due to the inherent subtle differences in the temperature distribution on the object's surface, the sensor can sensitively capture these changes, which is not a quality issue of the product.
Product features：
1. Module model: MLX90640_CSB
2. Infrared sensor: MLX90640ESF_BAB
3. Resolution: 32×24
4. Temperature measurement range: -40℃ to 300℃
5. Measurement accuracy: ±2℃ (central area, within the range of 0℃ to 100℃)
6. Working temperature: 10℃ to 50℃
7. Working humidity: ≤70%
8. Refresh rate: 8Hz
9. No calibration required
10. Field of view: 55°×35°
11. Display the temperature at the center point and the highest and lowest temperatures
12. Supports taking and saving images (up to 90 can be stored, and can be connected to a computer for copying and deleting)
13. Built-in rechargeable battery
14. Screen size: 1.8-inch TFT (Display resolution: 160×128
15. Product dimensions: 66×46× 20mm
16. Power interface: USB Type-C, 5V/1A
17. It is equipped with a 4M built-in memory chip and can store approximately 90 pictures
Operating Instructions：
1. Charging: Use a USB Type-C cable and a 5V/1A power supply
2. Power on/off: Press and hold the middle key for 4 seconds
3. Take a photo: Press the middle button briefly
4. View photos: Press the up or down key to browse
5. Exit the photo-taking mode: Long press the up or down key
6. Export photos: Connect to the computer via USB, and the device will be displayed as a disk. Please note that existing images on the disk cannot be modified or other files saved
7. Please ensure that the device is fully charged and turned off before connecting to the computer
Packaging list：
1 x Mini Thermal Imager
