New Universal 12V-220V Outdoor LED Signal Alarm Light Strobe Flashing Light Wall Mount Emergency Warning Lamp for Gate Opener
Input voltage:DC/AC: 12V~220V
Working current:<200mA @12VDC
Intensity:>100Lm 1.5W (3*LED)
Operating mode:1. bright, 2. flicker(flicker frequency:1HZ)
[This mode is selected by jump cap]
Interface:1. Power interface 2. Antenna interface
Operating temperature:-10℃~60℃
Storage temperature:-20℃~70℃
Product Weight:75.5g(without accessories)
Product standard:1 flashing light, 2 sets of screws and rubber sleeves, 2 flashing light fixing bracket screws, a manual
1)Antenna terminal: There is an RF antenna on this product, which is mainly used for the
external antenna configured by the user controller. When in use, connect the antenna interface on the
user controller to the antenna terminal of this product with a wire;
2)Power supply terminal: the interface used to supply power to this product, the power supply
voltage range: DC/AC12~220V;
3)Jumper terminal: used for the selection of always-on mode (NOR) or flashing mode (FL),
change the position of the jumper cap as needed;
3,Pass the power and antenna wires through the sealing plug on the bottom case; tighten the screws
and complete the assembly of the upper case;
4,After completing the above wiring steps, lock the flashing light on the bracket, and then fix the
product to the corresponding place according to the needs of use;
