
Overview:
– DIY alarm system with the capability to add up to 40 sensors, 10 remotes, and 10 doorbell buttons.
– Programmed and ready to use right out of the box.
– Inexpensive and simple intruder alarm system
– Can be easily transported and set up in different locations
– No network, GSM, or Wi-Fi capabilities required
– Press the “S” button on the remote to trigger the panic alarm
Suitable Applications:
– Sheds, garages, barns, shops, single-story homes, cabins, RVs, and other small spaces that need protection

Technical Specifications:
– Dimensions: 12mm x 10.2mm x 11mm
– Power: AC 110V to 220V, 92cm/3ft power cable (can be extended)
– Wireless frequency: 433MHz
– Operating environment: -15°C to 55°C, 40% to 70% relative humidity
– Typical wireless range: 328ft (100m) in open areas, reduced by obstacles

1. Alarm Systems to Secure Your Home
– WiFi-enabled house alarm system works with PIR motion sensors and door sensors
– Powerful 120-decibel siren to deter and scare off potential intruders


2. Works with Alexa or Works with Google Assistant
– Seamless integration with your preferred voice assistant
– Easily control and manage the alarm system using voice commands
3. Door Window Detector Magnetic Sensor
– Designed for rental properties, hotels, and single apartments
– Discreetly monitor doors and windows to enhance overall security

4. Wide Angle Detection
– 110 degree horizontal field of view
– 60 degree vertical field of view for comprehensive coverage area
5. Smart Alert Notifications
– Instantly send push notifications to your smartphone when the door or window is opened
– Only supports 2.4GHz WiFi networks for reliable connectivity

Setup and Usage:
1. Connect the siren unit to a power outlet.
2. Remove the insulation strip from the alarm sensors to activate them.
– Door/window sensor will flash once when turned on.
– Open the motion detector, check battery polarity, then turn it on.
3. Mount the sensors in the desired locations, drilling may be required for the motion detector.
Pairing Process:
1. Connect the siren to power, wait 6 seconds.
2. Disconnect and reconnect the siren's power 3 times.
– The siren will beep each time.
3. After the 3rd beep, the siren will enter pairing mode.
4. Pair the sensors:
– Motion detector: Turn it on to pair.
– Door/window sensor: Separate it from the magnet.
– Remote: Press any button to pair.
5. Once all devices are paired, disconnect the siren's power to exit pairing mode.
6. Reconnect the siren to complete the setup. 


Accessory List
Siren
– Can pair with up to 40 wireless sensors and 10 remote controls
– Alarm volume up to 115dB
– Wireless range of approximately 100m, reduced by obstacles
Remote Control:
– Arm: Activates the alarm, triggering siren if sensors are tripped
– Disarm: Deactivates the alarm and stops the siren
– SOS: Triggers the siren alarm for emergency assistance
– Test: Sounds a “Didi-Didi” test beep from the siren
– Detection range: 6-8m
– Vertical angle: 60 degrees
– Horizontal angle: 110 degrees
– Adjustable sensitivity
Door Sensor:
Package
Only WIFI Horn
1 x Siren Alarm Horn
1 x Power Adapter
1 x User manual
Kit1
1 x Siren Alarm Horn
1 x Wireless Door Sensor
1 x Wireless Motion Detector
2 x Remote Controller
1 x Power Adapter
1 x User manual
Kit2
1 x Siren Alarm Horn
2 x Wireless Door Sensor
2 x Remote Controller
1 x Power Adapter
1 x User manual
Kit3
1 x Siren Alarm Horn
2 x Wireless Door Sensor
3 x Wireless Motion Detector
2 x Remote Controller
1 x Power Adapter
1 x User manual
Kit4
1 x Siren Alarm Horn
3 x Wireless Door Sensor
6 x Wireless Motion Detector
2 x Remote Controller
1 x Power Adapter
1 x User manual
Kit5
1 x Siren Alarm Horn
4 x Wireless Door Sensor
8 x Wireless Motion Detector
3 x Remote Controller
1 x Power Adapter
1 x User manual
Kit6
1 x Siren Alarm Horn
5 x Wireless Door Sensor
10 x Wireless Motion Detector
3 x Remote Controller
1 x Power Adapter
1 x User manual
Q&A:
Q: Do I need to order an alarm panel (control center) for this siren?
A: No, this siren work as an alarm system, it can work with wireless sensors to protect your house.
A: Yes! This siren alarm system can work with 6 remote controllers and 30 wireless sensors like wireless gas detectors, smoke detectors, co carbon detectors, door/window sensors, pir motion detectors, water leakage sensors, vibration sensors and glass break detectors and so on.
A: Yes! User can use 1 remote controller to control 2 or more siren systems, or 1 sensors work with 2 or more siren.



















