keyless start
For convenience The key leaves the car 3-4 meters automatically locked
Comfortable entry: The car key will automatically unlock when it is close to the car 1-2 meters
Remote start:
After locking the car, press and hold the lock button for 2-3 seconds to start the car
Cooling/preheating:
Do not turn off the car air conditioning or heating, remote start the car will open itself
Automatic window closing:
Turn off the car to lock the four doors and windows will automatically close(This function is available for some cars)
Product List
①CAN1 ②CAN2 ③High Frequency Antenna ④High-end handle ⑤Low Frequency Antenna ⑥Low Frequency Antenna ⑦Starter plug ⑧Chip sensor box ⑨Induction Coil ⑩OBD plug ⑪Brake Line
Installation Tutorial
This installation diagram is for reference only, different car installation methods are slightly different (Consult customer service for details)
Induction coil fixing method（Put the induction coil on top test the keyless start normally, then fix it with tape to hide it）
Installation of key chips
Brake line（Black with red Brake line position）
Speaker wire: The speaker wire is in position 1 of the 464 relay. As shown in Figure 1
CAN wire: The orange wire of the product is connected to the green wire of the orange band in the car, and the black wire of the orange band of the product is connected to the black wire of the orange band in the car. As shown in Figure 2
