EASYGUARD Plug Play Factory Key Remote Starter with 4G LTE APP Control Fit for selected Toyota 17-22 Corolla Levin Allion

This is EASYGUARD PLUG & PLAY FACTORY KEY REMOTE STARTERSYSTEM fit for selected

Toyota

Corolla 19-22 PTS

Levin 19- PTS

Levin GT19-PTS

Allion 17-22 PTS

with Factory OEM push start button Automation transmission

1. Before buying, please tell us the detailed information of your car like VIN number/manufacturer plate/LHD or RHD/GAS Diesel or hybrid to check the right version for you.

2. More car models and years are available, please contact us for more information.

3. After installation you need to do a new program with 4G LTE module to use the function，please
prepare a local SIM card with internet access and tell us the SIM card’s APN in advance for presetting.

4. Install it by a trained staff or professional installer if you have no such kind of products installation experience.

How to Choose?

Option	Item name	Note
1	Remote starter + 4G LTE module	With 4G LTE & GPS tracking （Default version）

Main features

Ugrade factory key with remote start & stop

 

 

 

3X Lock Remote Start/stop

 

Keep factory key functions like remote lock/unlock, remote trunk release etc.

 

 

 

Engine Keep Running When the Door Is OpeningAfter remote start the car, when you open the driver‘s door, the car engine will keep running

NFC card unlock

 

 

 

Smartphone NFC lock/unlock

 

 

 

Can upgrade wit smartphone APP control & 4G LTE module with GPS tracking

No need to change car remote, use factory original remote.

Plug and play installation & no damage on car circuit.

Remote start can pre-warm or pre-cool your vehicles in cold winter and ot summer.

Automatic turn on air-conditioner via APP (optional, only some models support)

 

 

Automatic turn on air-conditioner via APP

(optional, only some models support)

 

 

Support APP window closing & opening (optional, required factory key support this feature)

Key Programming Method

You need to do new programming with factory keys

once finished installation.

Tips: Before programming, please be sure the ignition is turned OFF. Remember to unplug the aftermarket OBD device (if there is) from OBD connector.

Step 1: Continue to press the programming switch on the control module 3 times.

Step 2: When you hear the control module beep 3 times, press lock button once on the 1st factory key, and the control module will beep once, which indicates the programming is finished. Repeat same

instructions on the 2nd factory original key fobs.Programming finished.

 

 

Remote Start System Matching Method Tips：Before installation, please confirm that the vehicle voltage is

normal and that the ignition can start properly. Please disconnect any devices

connected to the OBD port (such as window lifters, automatic door locks,

auto-folding mirrors, and other devices).

Step1：After installing the control module, take the original car key 3–5 meters away from the vehicle to begin pairing.

Step2: Press the control module's code learning button 8 times in a row. The control module will beep twice to enter pairing mode. After a short delay, it will beep three times, then twice more.

Step3: When the control module beeps four times, bring the original key into the vehicle and wait 10s for the car to start automatically.

Step4: After the vehicle starts, wait for the control module to beep five times, then place the original key against the start button. Once the car beeps once, remove the key. Wait for the car to beep twice and then the control module will beep twice too, indicating successful matching. If the control module doesn’t beep twice and instead beeps 6 times after the timeout, matching has failed.

Step5: After matching completed, turn off the vehicle.