Q&A

Q1. What is the maximum charging current? whether can reach or not?

A1:To protect the battery, the system automatically identifies the battery voltage and selects the most appropriate current to charge the battery. When the battery voltage is low (for example, the 12V battery is less than 11V), the system automatically charges the battery at the maximum current.

Q2:Does The LifePO4 battery can fully charged?

A2:There will be a callback feature after this type of battery is full, and the power is off about 1V, which is normal, please know!

Features:

– Charge current switch.

-For batteries used on Battery Management Systems(BMS) only.

-For charging 12V or 24V LiFePO4 batteries.

-For activation or maintenance of weak, old and idle batteries.

Used to select a mode for charging 12V or 24V Lithium batteries,

-Can not repair severely damaged batteries. Not for Lithium and LiFePO4 batteries.

-For ordinary lead-acid batteries/maintenance-free batteries

including AGM, GEL, SLA, WET, DEEP CYCLE, EFB,Calcium, etc.

Specification:

AC input: 100-240 V 50/60Hz

Output voltage :12 V / 24 V

20A Output current :12V20A & 24V10A

No-load output voltage :27.6V

Minimum starting voltage: >7.0V

Power and load :MAX 240W

Suit for :Lithium/LiFePO4/Lead-Acid (AGM,GEL,EFB, MF, FLOODED, VRLA, SLA and Wet batteries..)

What to get:

1X Car Battery Charger

1x 3M Extension Power Cord(AU Plug cables' length only 80cm)

1x Cable Clip

1x Manual

1x Retail Box

HTRC 20A 12V-24V P20 Battery Charger for Smart Car Battery Charger Repair Auto Moto Lead Acid AGM GEL PB Lithium LiFePo4 Battery

Reviews

Write a Review

Contact

Company info

Purchase info

Shopping cart