• Easy to Use :With its simple design, the Desoldering Pump is easy to use, making it ideal for both professionals and DIY enthusiasts.
• Durable Material :Made of high-quality aluminum metal, this Desoldering Pump is durable and built to last, ensuring that you get the most out of your investment.
• CE Certified :The Desoldering Pump is CE certified, ensuring that it meets the highest safety and quality standards.
Warm Atten:
1.Please kindly make dispute for us to make refund or resend if not get your order on time to protect your benifit before make negative feedback.
2.By ordinary or economic airmail way cant track outside of China.
3.If like quickest way to get your order,please kindly choose Aliexpress Standard Airmail.Thanks!
Operation Manual:
1. Put the tin suctioner piston downward pressure to get stuck.
2. Heating solder joints to solder melting with electric soldering iron.
3. Remove the iron and quickly put the tin suctioner resistance paste solder, solder sucker and press the button.
4. If It is not clean at one time and can be repeated many times.
Using skills:
1. To ensure good solder sucker piston seal. Before electricity, with your fingers to plug hole solder sucker head, solder sucker head to press the button, if the piston is not easy to pop into place, that the seal is good.
2. The aperture tin suctioner heads are of different sizes, select the appropriate specifications.
3. Tin suctioner head wears, should replace the new one.
4. Solder paste is dipped in a little bit of rosin before contact with solder to improve solder fluidity.
5. Head contact pads are slightly longer, when solder melts, the solder joint pin as the center, then hand out in a clockwise direction to draw a circle, and then press the button tin suctioner.
Note:
Please allow 1-3 cm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
