Digital Soil Moisture Controller 220V Humidity Controller Soil Moisture Regulator LCD Hygrometer Soil Controller for Greenhouse

Digital Soil Moisture Controller 220V Humidity Controller Soil Moisture Regulator LCD Hygrometer Soil Controller for Greenhouse

STC-3029

Features:

Reliable performance and high work efficiency

Priority material, precise sensing

A variety of voltages are available for a wide range of applications

Fast response and good interchangeability

Widely used in water-saving irrigation, greenhouses, flowers and vegetables, plant cultivation and other fields

Product Name: Soil Controller

Model: STC-3029

Supply voltage: AC110-220V

Relay: 10A

Output power: 120W/240W/1500W

Humidity range: 0-100%RH

Control accuracy: 0.1%RH

Sensor length: default 1 meter

Product size: 75*34.5*85mm

Installation size: 71*29mm

STC-3030

Parameters:

Measurement and control range: 0%~100%

Resolution:1

Accuracy:±1%

Relay output two contact capacity: 10A/240VAC

Sensor: two soil sensors, line length 1 meter

Output power:120W/240W/1500W

Supply voltage: AC110-220V

Shell material: gray ABS flame retardant plastic shell

Power supply: 110-220VAC±10%, 50/60Hz (or DC12V/DC24V)

Long press “S” to enter the setting mode function adjustment.

Code: F0 Function: Differential return Setting range: 1-30 Default value: 2

Code: F1 Function: Calibration Setting range: -30~30 Default value: 0

Code: F2 Function: High humidity alarm Setting range: 0-100 Default value: 100

Code: F3 Function: Low humidity alarm Setting range: 0-100 Default value: 0 (turn off the alarm)

Code：F4 Function：Delay start Setting range：0-10 Default value：0 minutes

Features:

1. Can measure multiple types of soil, fast and easy to operate

2. Widely used in the following scenarios: water-saving irrigation, greenhouse, grass pasture, plant cultivation, scientific cultivation, etc.

3. Precise humidity control, automatic start-stop easily help you to deal with soil moisture problems

4. Sensor internal use of high-quality chip, to ensure that the sensor low power consumption, high sensitivity, signal transmission stability

5. Precise grasp of soil moisture: plants have different requirements for moisture to control how much moisture is easy to adjust

6. Ultra-long sensing line: 1-20 meters can be customized line length, to achieve outdoor control, outdoor detection, long-term outdoor work in water

7. Two-way soil moisture detection, two-way output, you can set different values of output according to different soil moisture, independent control of the output.

STC-3031

Features:

1.It can measure multiple types of soil, with fast speed and simple operation
2.It is widely applicable to the following scenarios: water-saving irrigation, greenhouse, grassland and pasture, plant culture, scientific culture, etc
3.Accurate humidity control and automatic start/stop can easily help you solve the problem of soil moisture
4.High-quality chips are used inside the sensor to ensure low power consumption, high sensitivity and stable signal transmission of the sensor
5.Accurate control of soil moisture: plants have different requirements for water. It is easy to adjust the amount of water
6.Ultra-long sensing line: 1-20 meters can be customized to achieve outdoor control, outdoor detection, and long-term outdoor work immersion
7.Two sensors control one output at the same time

Parameters:

Measurement and control range: 0%~100%
Resolution: 1
Accuracy: ± 1%
Relay output two-way contact capacity: 10A/240VAC
Sensor: two soil sensors with a length of 1m
Output power: 120W/240W/1500W
Power supply voltage: AC110-220V
Shell material: grey ABS flame-retardant plastic shell
Power supply: 110-220VAC ± 10%, 50/60Hz (or DC12V/DC24V)
Press and hold “S” to enter the setting mode function adjustment:
Code: F0 Function: Variance setting range: 1-30 Default value: 2
Code: F1 Function: Calibration setting range: – 30~30 Default value: 0
Code: F2 Function: high humidity alarm setting range: 0-100 Default value: 100
Code: F3 Function: low humidity alarm setting range: 0-100 Default value: 0 (close alarm)
Code: F4 Function: Delay start Setting range: 0-10 Default value: 0 minutes