12V 220V Solar Panel System 300W ETFE Solar Panel 150A Charge Controller 10000W 12000W Power Inverter Kit Power Generation Kit

1 * Solar Controller

1 * Solar Charging Panel

1 * Solar Panel PV Cable

1 * Power Inverter

2 * Battery Cable

1 * User Manual

Specification: (Solar Panel)

Name: Solar Charging Panel

Battery type: monocrystalline silicon solar cells

Rated power: 300W

Module efficiency: 20.3%

Power tolerance: ±5

Open circuit voltage: 22-24V

Short circuit current: 5-15A

Maximum power point operating voltage: 18v

Maximum power point operating current: 5-15A

Packaging material: ETFE

Chemical Type: EVA

Junction Box: MCA

Connector: MC4

Service life: 10 years

Size: 1050*540mm

Specification: (Controller)

Name: Solar Controller

Material: ABS

Current: 150A

Display: LCD screen

Size: 133*70mm/5.2″*2.7″

Colour: Black

Specifications: (Inverter)

-Name: Pure sine wave power inverter

-Input voltage: DC 12V for car

-Output voltage : AC 220V ,AC 110V

-Output frequency: 220V=50Hz, 110V=60Hz

-Peaks Power : 10000W/12000W

-Rated power: 10000W=1500W,12000W=2000W(Please make sure that the total rated power of the connected devices is ≤ 1500W,2000W)

-Product size: 28.8X7.5X15cm/30.5X15X7.5cm

-Maximum Active Surge Rating (less than 1 second) :10000W/12000W

-Maximum AC Current per socket :8.33Ampere

-Output Waveform: True/pure sine wave (<3% THD)

Efficiency: 90≥%   

-No Load Current Draw (DC side) <0.6 A

-8 Safety Protection Function: 

Reverse polarity protection, Low input voltage protection, High input voltage protection, Over-current protection, Short circuit protection, Over temperature protection, Overload protection, Internal fuses

Features:

* [Pure Sine Wave] Converts 12V DC to AC 220V household wall power with continuous 1500W output (10000W surge capability) with 1 AC receptacles, one LED Voltage display, high current DC terminals and two LED work lights. (Please make sure that the total rated power of the connected devices is ≤ 1500W).

* [Strong and Durable] Plastic housing provides advanced protection from drops and bumps.

* [LED Green&Red Work Lights] When inverter work normal, the two green LED Lights work, but when it is on protection status, the Red Led Lights will light up.

* [LED Voltage Screen display] LED Display shows the battery Input real-time voltage and remind you to charge your battery according to the low voltage.

* [Widely Applications ] Great for gift,charging TV, washing machine, air conditioner, refrigerant, Microwave and big power appliance. These can only operate a few 220V loads without interference. It can also use with in the car or solar system.

* [Car Becomes RV] With our car power inverter, you can use most of home appliances in your car in the open air, such a watching TV, playing games, give you the experience like being in an RV.

* [Silent Intelligent Cooling Fan] Equipped with silent cooling fan, it will automatically runs at different speed according to power load (watt) load and temperature for dissipating heat and reducing working noise.   There is a temperature sensor built in the inverter. When it is over 45℃, the fans will work automatically. When the temperature is over 75 ℃-80 ℃, the inverter will be in protection mode till it cool down.

NOTE:(Pure Sine Wave Inverter suitable for sensitive load appliances, such as refrigerators, air conditioners, coffee machines, bread machines, induction cookers, etc.)

CAUTION:

1. Tighten the Positive (+) and Negative (-) terminals when the car converter is in use

2. If the converter is directly connected with the cigarette lighter. The highest out put power must be under 150W. If higher than 150W,we strongly recommend you using the Crocodile Clips to a battery ,because car cigarette lighter might not afford power over 150W.

3. 12V car converter suitable for DC12V and Car ONLY, 24V car converter suitable for DC24V and Truck. The 48V inverter is only suitable for DC48V batteries (such as 48V lead-acid batteries, etc.), and the 60V inverter is only suitable for DC60V batteries (such as 60V lead-acid batteries, etc.)

4. Please do not leave the inverter in the ON position before car start. It’s easy to damage the inverter before connected to the battery. The correct operation is connect to the battery first and then turn on the inverter switch.

5. It’s normal for the inverter to become warm while you are using it. Please put the inverter on the flat surface The working place should keep dry, keep the inverter away from moisture or water. Do not put the inverter next to heat vents or other devices(between 0 Celsius degrees and 40 Celsius degrees). Try to keep the inverter not be shined directly by the sunshine.

Battery Usage Time Calculation:

1)The working time of inverter, it is depend on the battery power and load power.

2)Formula: Working time (hours)= Battery Capacity X Battery Voltage X 0.8X0.9/Load Power

3) For example, the battery of 12V 60A is supplied to a 220V 100W bulb.

The working time is = 12(V) X 60(AH) X 0.8 X 0.9/100(W)=5.18(hours)

( Note: 0.8 is battery discharge coefficient, 0.9 is inverter conversion efficiency)

What Size Power Inverter Do I Need?

The size you choose depends on the watts (or amps) of what you want to run (find the power consumption by referring to the specification plate on the appliance or tool). We recommend you buy a larger model than you think you’ll need (at least 10% to 20% more than your largest load).

Note:

1. Please allow 1-3cm (0.4-1.18″) difference due to manual measurement and slight color variation for different display setting.

2. Due to the light and screen difference, the item’s color may be slightly different from the pictures. Please understand.