XTOOL AD20PRO Full System Car Diagnostic Tool Maintenance Light Reset OBD2 Scanner Battery Test Code Reader Performance Test

Advantages of AD20PRO

1️⃣Potential faults, clear them in advance

Similar to a computer virus, it will not sound the light. In mild cases, it will increase fuel consumption, and in serious cases, it will cause the car to break down halfway. Clear all fault codes with one click and say goodbye to hidden dangers.

2️⃣Occasional faults, clear them with one click

When the fault light comes on, it does not necessarily mean that the car is broken. Sometimes the wiring harness plug of the sensor is loose. Once the plug is connected, the code clearing fault will disappear.

3️⃣Fault light is on when traveling, continue driving

The fault light is on when the car is traveling. Call a tow truck? Keep driving?XTOOL AD20PRO code reader helps you make the decision!

4️⃣Check before repairing the car to avoid wasting money

Use AD20PRO to check before repairing the car. The specific fault situation will be clear at a glance. Avoid encountering unscrupulous repair shops and being ripped off directly.

After driving for so many years, you still don’t know what to do when you encounter these problems?

1. Broken down halfway: The car suddenly broke down halfway and I didn’t know whether I could continue driving.

2. Fuel consumption soars: Fuel consumption rises slowly, using 2-3 units more fuel than others.

3. Car repair costs are high: Car repairs are expensive due to many repair items, and sudden failures cannot be understood.

4. Daily indulgence: Leave daily minor problems alone until it affects your driving and then have to repair them.

5. Sudden failure: The car's fault light suddenly lights up, so it is customary to call for consultation.

Premium Automotive Code Reader: AD20PRO

When there is no code reader:

1. Knowing nothing about the condition of the vehicle, it is impossible to determine if there is a fault.

2. The car's self-test will only illuminate the fault light and cannot display the specific fault.

3. Maintenance costs are fixed price. There are many maintenance items and the cost is high.

4. Small problems also require going to a repair shop, which increases the cost of maintaining the car.

5. Don’t dare to drive if the fault light is on, you can only call and wait for rescue.

After owning an AD20PRO fault detector:

Check faults anytime and anywhere so you know the vehicle condition and drive safer.

1. Check the entire vehicle body to find out the specific cause of the failure and provide maintenance suggestions.

2. Check the screen failure and cost yourself before repairing to avoid wasting money.

3. Daily maintenance of the car, battery check, and throttle check are also very simple.

4. Check the fault at any time by turning on the fault light, and register the fault to determine whether the car can be driven.

Not just car data reading, the car owner’s car digital butler

Diagnostic results can be compared with 4S store results

[AD20PRO Core Functions]

Suitable for many scenarios of car use, car maintenance and car repair, and can be used by all car owners.

1. Full vehicle in-depth inspection: supports engine/gearbox/ABS/tire pressure, airbag and other electronic control system inspections of the entire vehicle.

2. Clear fault codes, clear accidental or false alarm codes with one click.

3. Throttle valve carbon deposition detection: engine carbon deposition.

4. Maintenance light reset to zero: supports maintenance kilometers and manual reset.

5. Fuel consumption accounting: Generate exclusive fueling ledger to accurately manage fuel consumption.

6. Battery detection: Understand the health status of the battery in real time.

7. Data stream reading: Read the current working status parameters.

8. Trip management: record mileage, analyze fuel consumption, etc.

Battery Test

AD20PRO car tool supports battery test, check the battery voltage of the battery, generator power generation and starting voltage data, and timely feedback the real-time data of your car battery.

Maintenance Light Reset

Close the oil service light and reset service mileage & service interval after replacing the engine oil.

Performance Test

The maximum driving speed, engine load and coolant temperature reflected by acceleration up to 100KM/H can read the performance indicators of the vehicle to a large extent.

Note: The top speed reached 100km/h end test automatically

Intelligent management of trip records, correcting bad driving habits

Record mileage, analyze fuel consumption, record dangerous driving behaviors and other data.

Gas Ledger

AD20PRO supports analysis OBD2 data in live, specifically show a series of OBD2 engine data such as coolant temperature, intake air temperature, throttle speed, engine RPM, etc.

Live Data Display

Precisely manage fuel consumption. Automatically obtain real-time fuel prices, enter the fuel amount and it will be generated. Exclusive fuel ledger to accurately control fuel consumption and expenses.

One-Click Manual Troubleshooting Of Fault Codes

Save the trouble of going to a 4S store. If a fault code is accidentally or falsely reported, the device can be cleared directly. To ensure driving safety, it is recommended to repair the actual fault and then use the AD20pro code reader to clear it.expenses.

Real-time HUD Display

Adjust AD20PRO to HUD mode to display the real-time data of the engine as an instrument panel.

Multi-language Supported

English, Spanish, Russian,Arabic, French, German, Japanese, Korean, Polish, Portuguese, will be added in the settings in the next update (if there is no language you can choose, just wait for the next update).

AD20PRO Extended Function

AD20PRO supports simultaneous binding of multiple car models (you need to scan the product code on AD20 PRO to bind AD20 PRO for each binding)

Feedback& Comments: If you have any discomfort during use or if you have better suggestions, you can submit your comments and feedback online, and we will optimize and adopt some reasonable suggestions in subsequent upgrades.

Protocol Supported:

1.SAEJ1850 PWM(41.6Kbaud)

2.SAE J1850 VPW(10.4Kbaud)

3.ISO9141-2(5 baud init,10.4Kbaud)

4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)

5.ISO14230-4 KWP(fast init,10.4 Kbaud)

6.SO15765-4 CAN(11bit ID,500 Kbaud)

7.ISO15765-4 CAN(29bit ID,500 Kbaud)

8.ISO15765-4 CAN(11bit D,250 Kbaud)

9.ISO15765-4 CAN(29bitID,250 Kbaud)

How to use AD20PRO easier?

1. Download and install the AD20PRO application software (Advancer AD20) in the APP store or the Android market (or scan and download)

2. Register and log in to your account in the Advcaner program (requires email verification)

3. Connect the car and bind the car (need to scan the product code of AD20PRO)

4. Keep AD20PRO connected with Bluetooth (Bluetooth is connected inside the software) and enter the software

5. Start diagnosis

[User-friendly installation and use,multiple language support, easy to operate if you can read. Standard OBDII interface, no need for disassembly and loss-free installation, low power consumption, and no power consumption when plugged into the car for a long time.]

[Having been deeply engaged in the field of automobile diagnosis for many years, fault diagnosis is more professional. 350+ patents and copyrights, professional after-sales engineer team to serve you]

[Backup to detect the car status, detect the car anytime and anywhere, read the code, clear the code, if the code cannot be cleared, the user will also be prompted with the reason.]

[The detection information is also professional, specially developed and designed for car owners, and better understands the needs of car owners. It is simple to operate, easy to use, and can be used even if you don’t know how to drive. It is compact and requires no installation, and is cost-effective; suitable for car owners and some maintenance personnel.]