FOXWELL BT705 Car Battery Tester 12V 24V 100-2000 CCA Cranking/Charging/Max Load Test Scan Tool Automotive Battery Analyzer

FOXWELL BT-705 12V&24V Battery Load Tester

The battery testers from FOXWELL aims to analyze car battery issues and battery-related system issues. BT705 is dedicatedly developed to test 12V regular flooded, AGM flat plate, AGM spiral and gel batteries and 12V & 24V starting and charging system. It provides a quick, easy and affordable solution for technicians to check battery health and detect faults of starting and charging system. It is a professional battery tester for enthusiasts, small garages, independent repairs.

●Check the battery's healthy staus but limited to SOC, SOH, Resistance and etc.
●Tests 12&24 volt charging system.
●Tests 12&24 volt cranking system.
●Tests the batteries on the car directly- no need to remove the battery.
●Quick and accurate test result display in just 3 seconds, detects bad cells directly.
●Quick starter analysis without disabling the ignition.
●Does not emit light, heat or spark ,or discharge battery-keeps operation safe for all levels of users.
●Automatic temperature compensation.
●Ripple voltage test for easy and intuitive check of faults.
●Extremely easy to use with large backlight LCD display and menu-driven operation.
●Rubberized sleeve protects, 7.8ft tester cable with metal alligator clips.

●Multiple automotive applications: passenger cars, suvs, mini-vans, heavy duty trucks etc.
●Tests batteries from rated from 100 to 2000CCA. Cold Cranking Amps settings is in increments of 1 and you can line up with your battery ratings from 100 to 2000CCA.
●Tests multiple battery types- regular flooded, AGM flat plate ,AGM spiral and gel.
●Tests multiple rating systems-CCA,BCI,CA,MCA,JIS,DIN,IEC,EN,SAE,GB.

Vehicle Battery Analysis

GOOD BATTERY: Battery is in good condition.

GOOD-RECHARGE: Battery is in good condition but low current.

CHARGE & RETEST: Fully charge the battery and retest. If you still get CHARGE & RETEST after fully charge the battery, replace it.

REPLACE BATTERY:The battery is almost dead or the connection between the battery and battery cable is poor. Replace the battery and retest; or disconnect the battery cables and retest the battery using the out-of-vehicle test. BAD CELL-REPLACE:The battery may be damaged.

Vehicle Alternator Charging System Analysis

FOXWELL BT705 tester can judge the health of an alternator by testing the car's charging system(12V&24V).

BT705 tester can detect the change in battery voltage to indirectly determine the alternator's condition(works or not works), but it cannot test the alternator directly.

Vehicle Cranking Analysis

Vehicle Cranking Analysis
CRANKING NORMAL: The starter voltage is normal and the battery is fully charged.

LOW VOLTAGE: The starter voltage is low and the battery is fully charged.

CHARGE BATTERY: The starter voltage is low and the battery is discharged. Fully charge the battery and repeat the starter system test.

REPLACE BATTERY: Battery must be replaced before the starting system can be tested.

NO START: No vehicle start detected.

CRANKING SKIPPED: A start was not detected.

Advanced Technology

Euipped in FOXWELL unique chip which makes BT 705 battery analyzer fast to provide a accurate testing result.

Multiple automotive applications

passenger cars, suvs, mini-vans, heavy duty trucks etc.

FOXWELL BT705 12V 24V Battery Tester–Keep your Automotive in a Full of Energy Status at Any Time

The tester was packing in strong box which made of high impact strength material. With this protection carrying case, you can prevent your scanner from being damaged whether you place it in a trunk, toolbox, or garage. It fits right in the palm of your hand, making it an excellent addition to your tool box.

Foxwell BT705 Support Language

English, French, German, Dutch, Spanish, Polish, Portuguese, Italian,Turkish, Russian

Advanced Clamps & 7.8ft Test Cable

Package including:

1pc X Foxwell BT705 Main Unit
1pc X User's Guide
1pc X Carry Plastic Box