Solar Generation System Kit 6000W Modified Sine Wave Inverter Dual USB Solar Panel with 30A Controller Emergency Power Supply

Selling point:
1. [MCU LCD display] The on-board inverter is equipped with a micro control unit LCD to realize the exchange of human-computer information, and can understand the working state of the inverter in real time, including real-time display of input voltage, output voltage, output frequency, battery power, load, power on/off indicator light and other information
2. [High temperature warning indicator in LCD] It is a powerful display reminder function. When the high temperature exceeds 45 ° C, the temperature symbol will light up and display red, plus an audible alarm, and then turn off.
3. [Display battery level on LCD display] There is a battery level bar on the LCD screen, which can show you the real-time battery level. Green indicates full power, yellow indicates half charge, and red indicates low battery. You must charge the battery immediately.
4. [High/voltage warning in LCD] (1) When the high voltage warning is given, the v symbol lights up (red), the battery power bar flashes, the input voltage display shows 15V or higher, plus an audible alarm, and then turns off. (2) In case of low voltage warning, the symbol of v lights up (red), the battery power bar flashes, the input voltage display shows 10.5V or less, plus an audible alarm, and then turns off.
5. The [Power on/off indicator light on LCD display] symbol is green, indicating normal operation, and red, indicating fault and no output.
6. [Overload and short circuit in LCD display] In case of overload, the symbol (such as balance) will light up (red), the load level bar will flash, and no audible alarm will be output. In case of short circuit warning, the symbol (such as balance) will light up (red), the load level bar will flash, and no audible alarm will be output.
7. [Fast charging dual USB ports] One AC socket and two USB ports can provide 100% fast charging for mobile phones, computers, laptops, breast pumps, atomizers, razors, medical rescue equipment, emergency equipment, etc., which can be used as emergency power. The dual USB ports can charge most mobile phones and tablets at the same time (maximum 4.1A), while the AC socket is suitable for laptops, drones, fans, cameras, CPAP machines, game consoles, kindles, televisions, DVD players, lights, iPads, RVs and other electronic devices.
8. [Multiple protection] The built-in fuse, safe charging design and cooling fan can prevent the automobile power converter from overheating, thus saving power and energy. Protection against overvoltage, overload, overcurrent, short circuit, undervoltage, overheating and short circuit.
9. [Lightweight design and top quality] Lightweight and compact, it is very suitable for vacation, camping and work travel. It can be plugged into almost any 12V power output vehicle to provide charging opportunities anywhere.
10. [Multi purpose] It can be used as automobile power converter, automobile adapter, mobile phone charger, outdoor power supply, power failure emergency power supply, etc.
11. [Widely used] The power inverter is used in vehicles with continuous power of 500W and surge power of 1000W. It is widely used in camping, road travel, outdoor work, power failure, etc. Universal standard 110V AC power socket can better connect multiple appliances.

1. Solar panel 18W:
Power: 18W ± 5%
Size: 420x280x2.5mm
DC output: 12V/1.5A
USB output: 5V/1.7A
Weight: 0.7kg
Type: single solar panel
Material: aluminum substrate
Output accessories: DC cable+DC alligator clip

2. Power inverter 6000W:
Input voltage: DC 10.5V~15V,
(When the battery voltage is lower than 10.5V, the inverter is under low voltage protection; when the battery voltage is higher than 15V, the inverter is under high voltage protection)
Output voltage: AC 220V
Output frequency: 50Hz
Peak power: 6000W
Rated power: 500W (please ensure that the total rated power of the connected equipment is ≤ 500W).
Output waveform: corrected sine wave
Inverter product size: 200X112X56mm

3.30A 12V 24V automatic solar charging controller PWM, with LCD controller and dual USB
Charging current: 30A
Product size: 148.5x78x35mm
Voltage: DC 12V/24V automatic intelligent conversion
Display: LCD digital display
USB charger port: dual USB 5V 2.1A
Operating temperature: – 35~+60
Maximum solar input: 12V battery, maximum 23V
Floating charge: 13.7V (default, adjustable)
Discharge stop: 10.7V (default, adjustable)
Discharge reconnection: 12.6V (default, adjustable)
Charging reconnection: 13V
Open lamp voltage: solar panel 8V (lamp delay)
Low beam lamp voltage: solar panel 8V (extinction delay)
USB output: 2-way USB output, 5V/2.5A (maximum)

Package list:
inverter * 1+red and black battery clip * 1 pair+cigarette lighter * 1+solar controller * 1+solar panel * 1+DC cable * 2+DC alligator clip * 2