Specification:
– Protection ank: IP67
– Resolution range: 21 mm
– Assembly: SAE standard 5 holes
– Rated current for alarm switch: 500mA
– Operating temperatures: – 40 to 85 Celsius
– Fit for Fuel Level Gauge and Water Level Gauge
– Sensor Length :150mm, 200mm, 250mm, 300 mm ,350 mm ,400mm, 450 mm – Mounting: 5 pieces of M5 screws and 2 mm thick gasket
– Output signal: 0~190 ohm (Standard European),
fit for water /Fuel Level Gauge: 0-190ohm
– Fitment: for Gasoline, diesel, methanol fuel, ethanol fuel
– the blue wire of sensor is connect the Ground line,
– the brown wire of sensor is connect the gauge
Attention:
– Empty oil level : 0 ohm /
– Full oil level : 190 ohm
– When the oil / water level is empty , there will be a space of 3-15mm between the sensor float and the bottom of the sensor. This is a safe distance, and the sensor can work normally,Thank you~
– When the oil / water level is full, there will be a space of 3-15mm between the sensor float and the top of the sensor. This is a safe distance, and the sensor can work normally, Thank you~
Package:
1Xsensor
