1) 16 Channels
2) 50 Groups CTCSS ,105 Groups of standard DCS
3) TOT (Time-out Timer)
4) Battery Save Mode
5) Alarm function
6) H/L power shift
7) FM radio

Battery voltage
When the power of the radio is turned on, the radio will automatically detect the battery voltage. When the voltage drops, it will prompt “low battery”. You can continue to use it for a while, but excessive transmission will quickly drain the battery. When the battery voltage is very low, you will hear an error alarm and transmission will not be possible (you cannot transmit). Please charge or replace the battery pack at this time.

Power saving function
It can be set through the frequency writing software.
When the power saving is turned on for about 5 seconds without any operation, it will enter the power saving state by itself. Turning off the radio will not save power.

Voice reporting
On the CH15 channel, press and hold the PTT key and the MONI key to turn on the radio, and convert between Chinese and English.

Monitor
You can use the MONI key to monitor the smaller signals that are difficult to hear during normal operation, and you can adjust the volume when there is no signal on the channel you selected.

VOX function
On the CH1 channel, press and hold the PTT key and the MONI key at the same time to turn on the radio, and the voice control function will be switched on/off. (It is recommended to select through the frequency writing software)

Standard Box:
1 x Radio
1 x Antenna
1 x Battery
1 x Type-C Charge Cable
1 x Belt Clip
1 x English User’s manual

Notice:
Other accessories depends on your choice in the link.