BEIGOOD Pure Sine Wave Inverter 1000W 20000W 3000W Power DC 24V to AC 220V Voltage 50HZ 60HZ Converter Wind Solar Car Inversor

The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of th grid.

This model grid-tie has build in bridge rectifier and dump load controller, it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can't keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used.

There are 5 terminals on the left side of the inverter, 3 red terminals will be connected to the three phase output from the wind turbine, and 2 black terminals will be connected to dump load resistors. There are 4 LED indicators, 3 green indicators and 1 red indicator, 3 green LED indicators will start to cycle from left to right when the grid and AC input supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output

from the wind turbine. The bigger the output power is, the faster the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called “Island Protection”.

LCD display

On the LCD Panel of the inverter, there is one AC output socket, that will connect the AC output cable to home grid. The LCD display will display the grid AC voltage, current , active power and electric energy that combined to the grid. LCD display Function:

1. Electric parameters measurement function (voltage, current and active power, electric energy). 2. Running time function (record load cumulative working hours). 3. Backlight function. 4. Power down data save function (save the number of kWh, operation time). 5. Large screen LCD display (display voltage, current, power, active power, cumulative running time)

1. The product warranty period is within 10 years after purchase. (Damage caused by dismantling, manual damage, etc. is not covered by the warranty).

2. If the buyer finds that there is indeed a problem with the product within seven days after receiving the product, buyer could applied to seller to return for inspection. If the product is indeed defective, we will replace it with a new one. If there is no suitable substitute And we will refund you. Shipping, handling and insurance fees are non-refundable. If it is found that there is no problem with the product, the product will be returned to the buyer at the buyer's expense.

3. Please contact us to request a return authorization. Your name, auction number, and reason for return should be included in the email.

4. After receiving the goods, pls remove the tape around the box when unpacking, without violent damage, to avoid potential damage to the goods. It is recommended to keep the outer packaging for at least 15 days after receiving the goods. When returning goods, please ensure the integrity of the original packaging and the goods. If there is any reason that affects the secondary sales of the goods, the return and exchange cannot be accepted. All cost of return and tax will be covered by buyer.

5. When receiving the goods, if you find that the outer packaging is damaged, you should immediately contact the local courier to make a complaint and claim, and at the same time take a photo or video as the evidence and inform the seller. If the buyer fails to follow the above operations , then if the goods are damaged or lost due to courier reasons, the buyer shall take the responsibility.