We have updated our website, the total product price = ex-factory price + shipping cost, which will be more reasonable.
This will ensure that you can buy this product at the lowest price.
Since the shipping cost of each country is not the same, if we set the shipping cost as free shipping, it will cause you have to pay more.
.
Maybe you will get your goods directly, maybe the local customs will ask you to assist in customs clearance and pay the customs duties. You can check and understand the local customs policies.
If your goods stay at the local customs for a long time (maybe the local customs or the local courier company will call you), please contact the local courier company and provide them with a tracking number in order to assist in customs clearance and take away your goods.
If you are unwilling to assist in customs clearance and pay customs duties, please do not order it.
Our test equipment:
AC voltage regulator, DC voltage regulator, voltage stabilizer, intelligent program-controlled frequency conversion power supply, electrical parameter meter, ozone concentration analyzer, oxygen cylinder, oxygen machine, air compressor, oil-water separator, pressure regulating valve, flow meter, ambient temperature and humidity meter, aging test bench…
AC200V-AC240V, we will set: AC240V 50HZ for you.
AC100V-AC130V, we will set: AC130V 60HZ for you.
If the local voltage or frequency is special, when you order our products, you can leave a message to us.
.
If you don’t have a PLC or ORP controller, please choose: 60G adjustable or 60G and water pump.
.
.
Patented product, high ozone concentration, smaller size, air cooling + water cooling, inner and outer electrodes are 316L stainless steel, lower temperature rise, high efficiency, longer service life.
(The ozone PSU cannot work alone, you need to correctly install the ozone tube and the ozone PSU, connect them together, this ozone tube needs water to cool it, and then you can turn on the power.)
.
.
.
High-end air cooling + water cooling ozone generator kit:
Ozone output: 50-60G/H
Maximum power: 500W
Optimal power: 450W
Air flow: ≤100L/min
Oxygen flow: ≤20L/min
.
Gas source temperature: ≤35℃
Gas pressure: ≤100kpa (1bar/0.1mpa)
.
Cooling water temperature: ≤35℃
Water pressure: ≤300kPa (3bar/0.3mpa)
Water flow: ≥500L/h
.
Ambient temperature: -10~45℃
Optimal ambient temperature: 1-20℃
Environmental humidity: ≤85%RH
.
Gas source: Air source, oxygen source
Flange: PTFE+3L stainless steel
Shell: 304 stainless steel
External electrode: 316L stainless steel
Dielectric material: high-purity quartz glass tube
Inner electrode: 316L stainless steel
Discharge gap: 0.5mm
.
Patented product
Brand: Pinus longaeva (We can print your logo and paste it on the ozone tube)
Product certification: CE FCC ROHS
Product application: Air purification and water sterilization
Service life / Warranty: More than 20000 hours / 2 years
Customized: Can be customized
Size:
Ozone tube: 620*92*120mm 4kg
Ozone PSU: 254*135*85mm 1.95kg
.
Air / oxygen input: We recommend that you use 4*7mm silicone tube or 5*8mm PU tube.
Ozone output: We recommend that you use 6*8mm Teflon tube.
If you need to change the connector, please contact us.
.
Cooling water input and output: 1/2 inch, DN15, 20mm external thread.
.
.
.
.
Product picture:
(When the product works, there is no electricity on the cooling water and ozone tube shell, which is very safe)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Cooling fan:
Inner electrode cooling fan: DC12V 4cm 4028 high-speed cooling fan + 1.5A switching power supply (transformer), input voltage: AC100V-AC240V.
.
.
Installation requirements:
1. Ozone tube: You can install it on the metal shell, we recommend that you connect an additional ground wire to the ozone tube shell.
Please install the ozone tube vertically according to the prompts, the cooling water inlet at the bottom and the water outlet at the top.
Air inlet on top, ozone outlet on bottom.
2. Ozone PSU: You can use 11cm long screws to install the ozone PSU (ozone power supply) away from the ozone tube (metal shell or other electrical appliances) more than 10cm.
3. The closest distance between the ozone PSU and the metal shell or other electrical appliances is 10cm.
4. The closest distance between 2pcs ozone PSU is 20cm.
5. Red high voltage wire: Away from the metal shell and other wires for more than 2cm.
6. You need a dry and clean air source or oxygen source.
7. Please connect the red high voltage line and the ozone tube electrode socket, the yellow line and the ozone tube shell according to the picture.
8. You need cooling fan to cool the ozone PSU.
9. If you need to disinfect water, you can connect ozone output to air stone or venturi through the teflon tube.
When you get our products, you will get installation instructions, operation instructions and wiring diagrams.
If you still have any questions, you can contact us at any time.
Dehydroxylation high purity silica quartz tube ozone generator kit:
#1: Quartz tube:
99.9% silica, with strong hardness, high temperature resistance, low coefficient of thermal expansion (CTE), thermal shock resistance, good chemical stability & electrical insulation properties.
#2: High efficiency:
Narrow- gap discharge of 0.5mm, with high ozone conversion rate and low noise.
#3: Low power consumption:
High-voltage high-frequency corona discharge, with a power consumption rate of 8KW.h/kg O3.
#4: High voltage resistance:
The operating voltage of the tube is only 1/6 of its breakdown voltage, with a high dielectric constant.
#5: High quality:
The dielectric material is made of high-purity silica quartz, sintered at the high temperature, with high precision and uniform discharge. It is equipped with the 316L stainless steel internal and external electrode, PTFE flange gas nozzle and anti-corrosion high-purity fluorine rubber ring seals.
With internal electrode cooling fan, which can achieve more efficient heat dissipation, and the long time ozone decay is very low, <1/10.
#6: Service life:
More than 20,000 hours.
#7: Ozone PSU:
With over-current and over-voltage protection, short-circuit protection, open-circuit protection.
If the quartz glass tube is damaged, ozone PSU will automatically stop output high voltage.
.
.
.
.
.
.
.