|
Parameter |
Specification |
|
Product Name |
Mini Circuit Breaker for Electric Vehicle |
|
Product Type |
FXBZ-63 |
|
Rated Voltage |
12~100V DC |
|
Rated Current |
32A / 40A / 63A |
|
Pole Number |
1P |
|
Installation Method |
DIN-rail mounting |
|
Protection Function |
Overload Protection / Short Circuit Protection |
Operation Instructions
1. Installation: First, completely turn off the entire power supply of the electric vehicle, make sure the battery is fully powered off to avoid short circuits and electric arcs. Disconnect the positive wire of the electric vehicle, place the switch in series between the two ends of the positive wire for one-in and one-out connection. This DC switch supports both top-in bottom-out and bottom-in top-out installation, there is no mandatory restriction on the wiring inlet and outlet direction.
2. Status Judgment:
lWhen the indicator window is green and the handle is in the down position: The circuit is disconnected, and the power supply is cut off.
lWhen the indicator window is red and the handle is in the up position: The circuit is connected, and the power supply is normal.
3. Tripping Reset: When the circuit is overloaded or short-circuited, the breaker will automatically trip (handle down, window turn green). After troubleshooting the fault, push the handle up to reset and restore power supply.





















