Stc-3028 intelligent temperature and humidity controller
This product uses single-chip microcomputer control system, high precision temperature control sensor, built-in temperature and humidity controller and two modes of temperature and humidity (left side control the temperature), and the temperature Suitable for refrigerator with freezer/temperature control display case/greenhouse/medical equipment for pets/insulation for crawling/EPS/saunas/pc/civil equipment and industrial equipment etc D. Widely used in temperature control area, the biggest advantage is exquisite appearance, high performance, ability to embed directly into panels, such as industrial control equipment, easy to install and use.
Stc-3028 function description
Power supply: 110-220 V AC ± 10% 50/60Hz
Temperature control range: -20 ℃ ~ + 80 ℃
Humidity control range: 00% ~ + 100% relative humidity
Accuracy: ± 1 ℃, 0,1% relative humidity
Working voltage: 110-220 V AC
Output: 10A
Sensor: line length 1 meter
Body material: Gray ABS plastic, flame retardant plastic body.
Overall size: 75*34,5*85mm
Net weight 120 grams
Gross weight 140 grams
Description of temperature and cooling settings
Initial temperature <final temperature = heating
Initial temperature> final temperature = cooling
Press the △ 1 button once to display the start temperature, press and hold the △ 1 button for about 3 seconds to start flashing the temperature, and you can set the temperature pressing the button △ 1▽ 1
Press the ▽ 1 button once to display the stop temperature, press and hold the ▽ 1 button for about 3 seconds to stop the temperature flashing, and the desired stop temperature can be set with the button △ 1▽ 1.
Description of temperature and cooling settings
Start humidity <stop humidity = moisturize
Start humidity> stop humidity = dehumidify
Press the △ 2 button once to display the initial humidity, press and hold the △ 2 button for about 3 seconds to start flashing, and you can set the humidity by pressing button 2.
Press ▽ 2 key once to display the stop humidity, press and hold ▽ 2 key for about 3 seconds to stop the humidity flashing, and the desired stop humidity can be set with the key △ 2▽ 2.
Correction of temperature and humidity:
The function is used for temperature and humidity correction. If there is a deviation between the measured temperature and the actual temperature, you can use this function for correction, adjusted value = measured value + adjusted value, press △ 1 and ▽ 1 in at the same time and display 0,0 in 3 seconds, you can △ 1 ▽ 1 adjust addition and subtraction, adjust the value of correction. Wait 5 seconds and automatically return back to display the actual temperature. (the temperature and humidity adjustment method is the same, but the keys are different and the humidity key is △ 2▽ 2)
How to restore factory settings?
Press and hold the button on 1, 2 within 3 seconds, at the same time when the power is included, the digital tube displays 888, and then returns to the detection temperature, which means that the factory value was restored.
