• DIGITAL DISPLAY :The digital display provides accurate temperature and humidity readings, making it easy to monitor the environment inside your incubator.
• TEMPERATURE CONTROL :With the ability to control temperature, you can ensure that your incubator maintains the perfect environment for your eggs or seedlings.
• HUMIDITY CONTROL :The hygrostat feature allows you to control the humidity level in your incubator, ensuring that your eggs or seedlings are not exposed to too much moisture.
• VERSATILE USAGE :This thermostat hygrostat is suitable for use in a variety of indoor environments, including incubators, greenhouses, and home aquariums.
Specifications:
-
Be able to control temperature and humidity at the same time.
-
Be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time.
-
Heating/Cooling function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity Control.
-
Supporting Temp and Humidity Calibration
-
Dual Display Window,Be able to display measured temperature/humidity and set temp/humidity at the same time
Features:
-
Power Supply: 110-220VAC ± 10%, 50/60Hz or DC 12V
-
Temperature Control Range: 0°C~+110°C
-
Humidity Control Range: 0%RH~99.9%RH
-
Accuracy: +/-1°C 0.1% RH
-
Relay Capacity: 10A/240V AC
-
Integrated sensor: Sense temperature and humidity
-
Heating: Start temperature<stop temperature
-
Cooling: Start temperature>Stop temperature
-
Humidification: Start humidity<stop humidity
-
Dehumidification: Start humidity >Stop humidity
Set the start or stop temperature:
Long press UP 1 button for 3 seconds, ① display flashes, press UP 1 or DOWN 1 button to set the start temperature (20°C default)
Long press DOWN 1 button for 3 seconds ① the display flashes, press UP 1 or DOWN 1button to set the stop temperature (30°C default)
Set the start or stop humidity:
Long press UP 2 button for 3 seconds, ② display flashes, press UP 2 or DOWN 2 button to set the start humidity (40%RH default)
Long press DOWN 2 button for 3 seconds, ② the display flashes, press UP 2 or DOWN 2 button to set the stop humidity (60%RH default)
Reset:
Long press DOWN 1 and DOWN 2 button for 3 seconds to reset the controller.
Calibration method:
Long press UP 1 and DOWN 1 to calibrate the temperature, -10~10 °C
Long press UP 2 and DOWN 2 to calibrate the humidity
Package Content:
-
1 x STC-3028 temperature humidity controller
-
1 x temperature humidity sensor
