Instructions

Use case

DR Terminator Used On PC

1.Read and Save Date

1:Plug the USB into the computer and open the software

2:Select the USB-to-serial device, and then click on the option indicated by the arrow (Open Serial Port）

3:Press the Read button on the NXP Terminator.When reading, the green light on the Read button keeps flashing. Once reading is complete, the green LED stops flashing and stays on. At thispoint, the data reading is done!

4:Read complete, The data will be automatically sent to the computer. Just click the 'Save Data' button, and two files (DAT and TXT) will be automatically saved to the computer's serial port software folder.

2.Write Date

5.Clear Data Or Open New Software

6.Choose DAT File(Right-click the mouse and select Properties, but you can't set it as a read-only file)

7.Send File To DR NXP Terminator(At this point, it's basically like the device has already loaded the program.)

8.After connecting the new key, press the Write button on the DR terminator,The green indicator light on the Write Button will keep flashing until it stops, which means the writing is complete and you've finished cloning the key for PC data storage.(Because the program is being transferred from the PC, only the Write light will stay on at this time.)