EASYGUARD plug play remote starter T402 for Toyota Sienna 2011-2017

Dear customer

Please read carefully before you place the order to ensure that you buy the correct model for your car.

Vehicle requirement:

This item only fit for selected Toyota & Lexus with Factory OEM push start button Automation transmission Gas/diesel Engine LHD Car

only for as below car model list:

Important note before buying:

1. please kindly send us a message before you place the order, then we can prepare and ship your goods asap

1) for key start car or the car with oem push start button?
2) is it a automatic transmission car or a manual transmission car?
3) is it a petrol, diesel or a hybrid car?
4) for left hand drive vehicle or right hand drive vehicle?

please note:

Don’t Work with Key Start Vehicle, do not work with hybrid cars

Automation Transmission Only, don’t work with manual transmission

Fit for LHD (Left hand drive) vehicles, don’t work with RHD (right hand drive) vehicles.

Don’t fit for Turkey cars

2. This product is factory car key remote starer, it is required 2 working car keys, and you can use you original car key to remote start the car after installation, and please let a trained staff to install it

3. Our price doesn't include vat & tax, you may need to pay it yourself if there is, thank you for your understanding!

4. Once finished installation, you need to do a new programming.

Main Features:

1. 3X Lock Remote Start/stop

Note: There is no remote in this kit, use factory original remote/key fobs to remote start/stop.

Remote start method: Continue to press original remote lock button 3 times will remote start/stop the car.

2. Open Door to Shutdown Notice

Open Door to Shut down: After Remote Start the car, when you open the driver door, the car Engine Will Shut Down for Safety consideration.

3. No need to change car remote, use factory original remote

4. Plug and play installation & no damage on car circuit

No need to cut or splice wires

Install it by a trained staff or professional alarm installer if you have no alarm installation experience.

Programming Procedure:

Once finished installation, you need to do a new programming.

Before programming, please make sure the
engine cover is closed and ignition is turn OFF.

Step 1: Plug the 4pin & 22pin connector with the Control Module,

Step 2: Don’t step on foot brake pedal. Press the factory push start button twice to turn Ignition to ON Position.

Step 3: The LED will flash red, then flash green color and turn off.

Step 4: Press push start button once to shut down the car

Programming finished.

If the programming procedure is abnormal,
please program again or reset it first then program till you program it success.