Elecpow Door Alarm Wireless Remote Control Anti-Theft Door And Window Security Alarms Sensor for Do-It-Yourself Home Security System. Many burglaries occur from break-ins through doors/ windows, especially side, rear and garage doors. This door security devices with 105 dB loud alarm sound can help to deter the intruder, wake or alert you if at home and possibly alert neighbors. The wireless door alarm have 4 modes— Arm/Disarm/Panic/Doorbell mode controlled by the remote, wireless control range up to 49 ft. Not only a DIY door and window alarm, but also a door open chime/ pool alarm for kids safety or helps notify you if kids/ pets or visitors coming/ going, and emergency alert system for the older/ patients.
Feature:
-
Arm/Disarm/Panic/Doorbell mode controlled by the remote
-
Magnetically triggered alarm suitable for Doors or Windows
-
More alarms and remotes available for pairing
-
Detering thieves effectively by 105dB loud alarm
-
Simple peel and stick installation
Specifications:
1.An alarm need two AAA alkaline batteries ( not included )
2.A remote need a 12V/27A alkaline battery ( included )
3.They can work for at least a year with low-consumption design
4.Product size: Alarm( 3.35*1.57*0.59 inch), Remote( 2.48*1.18 inch), Magnet box(1.77*0.47 inch)
5.Package weight: 71 g
Package Including:
-
1* Door Alarm
-
1* Magnet Sensor
-
1* Remote Control
-
3* Adhesive Tape
-
1* User Manual
:Suitable for various types of doors windows (sliding/crank/hung….doors and windows ), cabinets, and drawers…
49ft Wireless Remote Control
:There is double-sided adhesive on the Alarm and Magnet box, just peel and stick to doors.
How to pair alarms with your remote?
1.Change to disarm mode by the remote.
2.Put one battery into the alarm need be paired at first.
3.When put the other one into the alarm need be paired, press and hold the doorbell button of the remote.
4.After you hear a “Bi…”, press arm button once.
5.Then the alarm will sound two “Bi… Bi…”.
6.It is well done.
How to use your remote?
1.Arm Mode: When you press arm button, the alarm will sound “Bi Bi Bi”. And 15 seconds later it will sound “Bi” to indicate that the alarm is in arm mode.
2.Disarm Mode: When you press disarm button once, the arm will sound a long “Bi…” to indicate that the alarm is in disarm mode.
3.Panic Mode: (for emergencies) When you press panic button, the alarm will alarm 30 seconds immediately. It is effective in any mode.
4.Doorbell Mode: When you change the alarm to disarm mode and press doorbell button, it will sound “dingdong” to indicate that the alarm is in doorbell mode.
Product Size:
-
Alarm (3.35*1.57*0.59 inch)
-
Remote (2.48*1.18 inch)
-
Magnet stripe (1.77*0.47 inch)
