Elecpow Wireless Door Open Chime 36 Ringtones 4 Volume Levels Shop Store Welcome Chime LED Flashing Light Door Window Alarm
Split Door Open Chime wireless range of up to 918ft in the open air. The magnetic sensor activates when the magnetic stripe is separated, it transmits a signal to the portable receiver and then up to 113dB alarm will alert you. Suitable for Doors, Windows, Sliding Door/ Window. Application: home, shops, hotels, offices, restaurants, supermarkets…
-
1 x Desktop base
-
2 x Double Tapes
-
1 x Instruction Manual
-
1 x Door Alarm Receiver
-
1 x Magnetic Transmitter
-
Low battery indication
-
Ring Volume: ≤113dB
-
Operating range: 280m/918ft
-
Working frequency: 433.92MHz
-
Battery lifespan: 5-7 months (based on 30 minutes per day)
-
Power Supply (Receiver): Micro USB or AAA alkaline battery x 3 (not included)
-
Power Supply (Magnetic Transmitter): Micro USB or AAA alkaline battery x 1 ( included)
1.Doorbell Mode: door open chime, 36 selectable chimes tunes for your choice
2.Colorful Light Mode: no sound, 4 colors for your choice, suitable for quiet environment
3.Welcome Mode: 5 language of “Welcome”, suitable for shops, stores, restaurants, supermarkets…
4.Alarm Mode: up to 113dB alarm, effectively help to deter the intruder, wake or alert you if at home and possibly alert neighbors
5.Night Light Mode: Receiver automatically lights on for 2 minutes only, when the magnetic sensor activated, with 4 adjustable levels brightness
How to pair receiver and sensor
1. Turn off the receiver by press and hold the power button;
2. Put magnetic sensor and magnetic strip near together;
2. Press and hold the volume button to enter leaning mode, then release, program starts;
3. Separate magnetic sensor from magnetic strip, receiver makes “du” sound.
4. Done. (It means you have paired successfully if you heard “du”)
5. Repeat the above steps to add more sensors.
Installation:
Select windows and doors to the installation location, with water and cloth to clean the mounting surface, the double-sided adhesive tape on the bottom and then this alarm is attached to the clean position
Installed host, and then double-sided stickers magnets host next door or door frame.
NOTE:
-
Pay attention to set the magnetic iron arrow at the arrow to the right host.
-
Ensure close the door the host and the magnet installation distance should not exceed 10mm.
