FOXWELL BT705 12V Car Battery Tester 24V Battery Analyzer 100-2000 CCA Automoive Battery Diagnostic Tool

Car Battery Tester Analyzer BT705 Support languages:

language pack 1:English, Dutch, Spanish, French, German;
language pack 2:English ,Polish ,Russian,Italian,Portuguese ,Turkish .

Note

The default language for the device is English+Spanish. If you need another language, please provide the serial number to the merchant or customer service on the official website, and we will help you replace it

FOXWELL BT705–BATTERY TESTER for 12V and 24V

The latest BT705 (100-2000CCA) Battery Analyzer form Foxwell is dedicatedly developed to test 12V regular flooded, AGM flat plate,AGM spiral and gel batteries and 12V & 24V starting and charging system.It provides a quick,easy and affordable solution for technicians to check battery health and detect faults of starting and charging system.

Car Battery Analyzer Features and Benefits:

1.Multiple vehicle applications -passenger cars and duty trucks
2.Tests batteries from rated from 100 to 2000CCA
3.Tests multiple battery types- regular flooded,AGM flat plate ,AGM spiral and gel
4.Tests multiple rating systems-CCA,BCI,CA,MCA,JIS,DIN,IEC,EN,SAE,GB
5.Tests the batteries on the car directly- no need to remove the battery
6.Detects bad cells,7.8ft Tester Cable
7.Quick and accurate test result display in just 3 seconds
8.Tests 12&24 volt charging system
9.Advanced starter /alternator test
10.Quick starter analysis without disabling the ignition
11. Does not emit light,heat or spark ,or discharge battery-keeps operation safe for all levels of users
12.Automatic temperature compensation
13. Ripple voltage test for easy and intuitive check of faults
14.Extremely easy to use with large backlight LCD display and menu-driven operation

Car Battery Health Analyzer

💓 GOOD BATTERY: Battery is in good condition.
💓 GOOD-RECHARGE: Battery is in good condition but low current.
💓 CHARGE & RETEST: Fully charge the battery and retest. If you still get CHARGE & RETEST after fully charge the battery, replace it.
💓 REPLACE BATTERY: The battery is almost dead or the connection between the battery and battery cable is poor. Replace the battery and retest; or disconnect the battery cables and retest the battery using the out-of-vehicle test. BAD CELL-REPLACE:The battery may be damaged.
The battery life tester keeps the results of last test only. When you start a new test, the last results are overwritten.

Cranking test:

analyze the actual required cranking current and cranking voltage of the starting motor.

💓 NO PROBLEMS: System is showing normal output from the alternator.

💓 NO OUTPUT: No alternator output detected. Check all connections to and from the alternator, especially the connection to the battery. If the connection is loose or heavily corroded, clean or replace the cable and retest. If the belts and connections are in good working condition, replace the alternator. (Older vehicles use external voltage regulators, which may require only replacement of the voltage regulator.)

💓 LOW OUTPUT: Alternator not providing sufficient to power the system's electrical loads and charge the battery. Check the belts to ensure the alternator is rotating with the engine running. Replace broken or slipping belts and retest.

Charging test:

analyze the charging system, including generator, rectifier, rectifier diode, etc., which it give you reliable data for your reference. If one of the above mentioned parts is not in normal situation, it will lead to over charge or incomplete charge of the battery, thus the battery will be quickly damaged and also greatly shorten the using life.

💓 CRANKING NORMAL: The starter voltage is normal and the battery is fully charged.
💓 LOW VOLTAGE: The starter voltage is low and the battery is fully charged.
💓 CHARGE BATTERY: The starter voltage is low and the battery is discharged. Fully charge the battery and repeat the starter system test.
💓 REPLACE BATTERY: Battery must be replaced before the starting system can be tested.
💓 NO START: No vehicle start detected.
💓 CRANKING SKIPPED: A start was not detected.
Note: Before starting the test, inspect the alternator drive belt. A belt that is glazed or worn, or lacks the proper tension, will prevent the engine from achieving the rpm levels needed for the test.

Foxwell BT705 Support Language

English, French, German, Dutch, Spanish, Polish, Portuguese, Italian,Turkish, Russian

Package including:

1pc X Foxwell BT705 Main Unit
1pc X User's Guide
1pc X Carry Plastic Box