G-PENNY 110v 220v 1.5kw ER16 Water Cooled Spindle Motor Kits D=65mm 4 pcs 7 Series Bearings & Inverter & water pump & bracket

1pcs & 1.5KW ER16 D65 Water coold spindle motor 4pcs bearings

1pcs & 1.5KW QL Inverter/VFD

1pcs & 65mm Bracket

1pcs & 75W Water pump (5m pipe/EU Plug)

Basic parameter:

Size: 65x210mm(Middle body diameter:65mm;Length:210mm)

Speed Ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.

Cooling: Water cooling

Power Interface: The air plug marked “1 “,”2″,” 3″,” 4″, “1 “,”2 “,”3” were connected to inverter (U, V, W), 4 connected inverter ground.

Power: 1.5kw

Voltage: 110v/220v

Current: 12A/7A

Frequency: 0-400Hz

Speed: 0-24000rpm

Runout Off: Less than 0.01mm

Diameter(mm): 65

Bearing Type:2 x 7004 P4 DT & 2 x 7000 P4 DT

4pcs fully sealed angular contact bearings

Collet: ER16
Clip Knifediameter:1-10mm
Water Cooling ER16 collet chunk
Grease Lubrication

Main Application: Engrave for wood,bamboo,normal PCB,PVC,PMMA,plastic,duotone board(ABS)and etc nonmetal, also can engrave on gold,silver,copper, aluminium,Pb etc soft metal surface working.

(Please pay more attention, this is wood working spindle, only can used for wood working and aluminum working,please don't use it for steel. If you need steel working,please check the metal spindle,thank you!)

Advantage:

1. P4 fully sealed angular contact bearings ,2×7004 P4 DT &2×7000 P4 DT,increase spindle life .

2. ER16 collet, can use 1-10mm cutters

3. Longer length make the torque bigger,more powerful.

4. Carefull assembly make the spindle more precisional.

5. Precision 0.01mm.Coaxial degree less than 0.0025mm

6. We are the spindle manufacturer,we offer only best quality and best price to you.
   

Basic parameter:

• Power: 1.5KW

• Input Voltage: 110v/220v

• Curent: 14A(110V) / 7A(220V)

• Output Voltage: 0~110v/220v

• Input Frequency: 50/60 Hz

• Output Frequency: 0-1000 Hz

DO NOT set up the inverter by yourself if you don't know how to, or it will make both the spindle and inverter burn easily.
Please contact us, we have manuals, videos and pictures to help you.

Advantage:

1. The outer plastic shell of the inverter is made of ABS flame retardant raw material, which is flame retardant and not easy to break.

2. The inverter cooling fan is a domestic first-line brand Huaxia Hengtai, the air volume is more than 20% higher than that of ordinary fans, and the service life is more than 5 years.

3. There is an independent cooling air duct inside the inverter, which can form an independent space and effectively prevent dust, water mist, etc. from entering the circuit board.

4. With MODBUS485 communication function, built-in braking unit.

5. Built-in PID setting, speed tracking, multi-function relay output, multiple fault protection, multiple state feedback torque control, analog setting.

6. The capacitor brand used in the inverter is Taiwan loose control, the temperature resistance is 105 degrees, and the temperature resistance of ordinary capacitors is 80 degrees.

7. The maximum output frequency of the inverter can reach 1000HZ,

8. Currently has CE certificate, CSA certification program has passed, in certification.

9. Heavy load and high torque, 1HZ can reach full torque.

10. Up to 16-stage speed control can be achieved.

Basic parameter:

Diameter:65mm

Material:Cast Aluminium

Basic parameter:

Max Head: 3.2 m;

Power: 75w;

Maximum flow: 3200L / H

Plug Cord Length: 1.4m

Voltage: 220V;

Frequency: 50 HZ

Outlet size: 4 and 6 mm;

Dimensions: 145 * 110 * 90 mm

Spindle working environment temperature is usually -10 ~ 40 .

Before installing the first electric spindle axis head turned by hand, should feel flexible, non-blocking phenomenon.

• Spindle in the preservation and transportation, high-speed grease inside the bearing state will change, customers should be running at low speed for 30 minutes. 3000 rpm and then follow the poor increase, run 20 minutes each. Spindle and the inverter should be working together. The inverter's specifications and parameter settings need match spindles parameter.(Because of high-speed grease inside the bearing state will change,when you get the spindle, maybe the noise sounds not normal.Please run it 30 minutes or even more, the noise will be normal.)

• Connect the inverter spindle, three-phase inverter power cord should be soldered in the plug 1 (U), 2 (V), 3 (W) feet, 4 feet for the ground. After the power is turned on, to observe whether the spindle rotation axis indicates the direction consistent. If inconsistency should be immediately shut down, replace the inverter and spindle connected two wires of three-phase power supply.
  

• During normal operation, air-cooled spindle often encounter the phenomenon of heat, always check whether the air-cooled spindle housing and duct clogging dust.If clogging dust, to promptly clean up. If you do not clean up, it is easily to make the spindle burned.

• Every day before using the spindle must be running at low speed for 15-20 minutes. Clamping the cutters to spindle, collet nuts ,collets,cutters must be clean enough. Shank inserted into the collet must be greater than 15mm.

If the spindle will not be used for a long time, please keep the spindle oil sealed to prevent rust from being unused for a long time.
Before shipping, we did the oil seal to avoid the rust during the long shipment.

When you get the spindle, please clearing the oil seal before using. Thank you.

• Water cooled spindle MUST be used with water pump. Otherwise the spindle will soon broken.
  AC spindle motor MUST use with inverter.

• The power of inverter need equal or bigger than the spindle power. Before using,please set up the inverter parameters suitable for spindle. Otherwise the spindle and inverter will broken at once.

• When you use the spindle,the noise is not same as always,please STOP the spindle at once. You may need to replace the spindle bearings.

Spindle from the production – assembly – test, and finally the perfect packaging .

We will 100% guarantee security to the hands of the guests.

Shipping Cost

Our products are sold worldwide.
If you need many items in the same time, please contact us in advance to confirm shipping cost.

Payment:
We accept PayPal credit, bank transfer, western union etc.
Payment must be made within 7days calendar days of the auction end time.

Problem and Feedback:

PLEASE DON'T leave any negative feedback before you contact us.
We are honest and helpful supplier , we will try our best to solve problems with you.
Your satisfaction is very important for our store, so please contact us before you want to leave a negative feedback.
Thanks very much in advance.

Refund:

If you are NOT SATISFIED with our package like the products is damage, please do not sign it and contact us immediately.
If it is possible, please take some photos or make a small video about it. It will help us to solve the problems.

Note:

We can produce the product according to our customer's design.
If you need something is very special, please contact us about it.
We are willing to help you about it.