Product Description:
Made of – materials for durability
With this conversion kit installed, your generator will be able to use for LPG propane or CNG methane without any on the generator's (you can still use ). This kit is only suitable for low pressure gases such as domestic propane.
Conversion kits include a pressure regulator and a carburetor. The pressure regulator reduces the propane for or natural from high to low and stabilizes the for pressure before entering the carburetor and then the engine; when the generator stops working, the pressure regulator also shuts off the gsupply, So it's safe, you don't have to worry about thegas still going into the engine after the generator goes out.
After the conversion, the generator power remains unchanged. When using propane or methane for , power depends on generator quality and quality.
TriFuels: , Low Pressure Propane for LPG for Gas/Methane CNG (use only at a time)
Weight: Approx. 600 grams
Accessories: It is mainly designed to replace a for Honda 168F generator, but please check ourcarburetor sizes to see if it can replace your generator carburetor, if so, it will fit; if not, put Not suitable.
EASY INSTALLATION: Just replace your generator carburetor with our carburetor(please double check if your generator carburetor is replaceable before buying!)
NOTE: It is your responsibility to for ensure that the use of this conversion kit complies with your l'ocal laws.
NOTE: When starting with propane or methane, make sure there is no in the carburetor or the generator will not work properly.
Instructions for use:
The new does not contain oil, please add 0.9L before use.
(The instructions in Chinese translation below may be confusing, don't worry, just use propane(or methane) as an alternative fuel, when you use propane(or methane) , it's using , just be careful, start using When using propane(methane) , make sure there is no in the carburetor; when using , make sure there is no propane(methane) in the carburetor, simple!)
How to start the generator:
– Start with propane:
1. Turn off the switch(make sure there is no in the carburetor)
2. Turn on the propane switch.
3. Close the throttle valve switch, for Pull it 3 to 4 times, open the throttle valve to the middle and then fully open it; when the engine is hot, it will open and start directly.
4. Turn on the power switch
5. for Pull the start rope 4-5 times(throttle valve closed or open to the middle)/(key) generator start
6. After starting, open the throttle switch on the carburetor mixing device
7. The generator starts normally
Generator shutdown steps: Turn off the propane tank switch first, then turn off the generator switch.
– Start with :
1. Turn off the propane
2. Turn on
3. Turn off the choke switch on the carburetor
4. Turn on the power switch
5. for Pull the starting rope several times, the generator starts
6. After starting, open the throttle switch on the carburetor mixing device
7. The generator starts normally
Notice:
1. Do not use indoors, if necessary, please for ensure good ventilation
2. Do not use when the intake pressure is too high or too low, the working pressure should be between 2.8~4.8
3. It cannot be determined whether there is air leakage at the outlet connection of the tank or the connection of the pipeline
4. Do not turn the storage tank upside down to prevent for impurities from entering the
Package Included:
1* Generator Conversion Kit
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
