INTRODUCTION
Thank you for purchasing SF1 Stud Finder. The tool is used to detectmetals
(ferrousandnon-ferrousmetals),woodstuds,and”live” ACwiresinwalls,ceilingsandfloors.
Toachievethebestperformance ofdetection,pleasereadthisuser'smanualcarefullyandthoroughly before using thetool.
TECHNICAL DATA
|
Maximum scanning depth |
Ferrous metals |
4.7″ / 120mm |
|
|
Non-ferrous metals(Copper) |
4″ / 100mm |
||
|
“Live” AC Wires (220V@50Hz/110V@60Hz) |
2″ / 50mm |
||
|
Wood studs |
Exact mode |
3/4″ / 20mm |
|
|
Deep mode |
1-1/2″ / 38mm |
||
|
Automatic switch-off |
Approx.5 minutes of inactivity |
||
|
Operating Temperature |
-10℃ to 50℃ / 14℉ to 122℉ |
||
|
Storage Temperature |
-20℃ to 70℃ / -4℉ to 158℉ |
||
|
Operating relative humidity |
35% – 55%RH |
||
|
Power Source |
1*9V Battery |
||
NOTE: The detector's ability to detect objects is affected by the proximity of other equipment that produce strong magnetic or electromagnetic fields, and by moisture, the size of objects, metallic building materials, foil-laminated insulation materials and conductive wallpaper.
