product

Wireless Tracker

CubeCell GPS-6502
(HTCC-AB02S)

Mesh Node T114

These three products are all LoRa and GNSS, which can obtain location through GPS and then transmit it using LoRa. The transmission

distance can reach 3.5 kilometers in rural or suburban areas, and 7 kilometers in open areas such as pastures

brief
introduction

Wireless Tracker is a development kit based on ESP32-S3FN8. 0.96 inch 160 * 80 LCD display, as well as SX1262 LoRa chip and UC6580 GNSS chip.

HTCC-AB02S is a Dev-Board. Already integrated AIR530Z GPS module

Mesh Node T114 is a development board

based on nRF52840 and SX1262, supports

LoRa and Bluetooth 5.0, optional 1.14 inch

TFT display and GPS module as accessories.

LoRa Band

470-510MHz
863-870MMHz
902-928MHz

470-510MHz
863-870MMHz
902-928MHz

470-510MHz
863-870MMHz
902-928MHz

Options

0.96 inch 160 * 80 LCD display
glue rod antenna
spring antenna

glue rod antenna
spring antenna

1.14 inch TFT display
GPS module
shell
glue rod antenna
spring antenna

Summary

Wireless Tracker is a development kit based on ESP32-S3FN8. It integrates both SX1262 and UC6580 to provide fast GNSS solution for IoT. It can track any object and then upload that data wirelessly by Wi-Fi, Bluetooth, LoRa, and has been widely used in Meshtastick.
supports L1 + L5/L2, and supports GPS, GLONASS, BDS, Galileo, NAVIC, QZSS multi-system joint positioning,
compatible with Arduino,can be widely used in development such as bicycle sharing services, tracking pets or livestock, locating vehicles, tracking children, etc.

CubeCell (TM) is a new product series made by Heltec team, mainly for LoRa/LoRaWAN node applications.
CubeCell (TM) series is based on ASR605x (ASR6501, ASR6502), those chips are already integrated with the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262.support Arduino®,can run the LoRaWAN protocol stably, can easily connect lithium batteries and solar panels.Already integrated AIR530Z GPS module

Mesh Node T114 is aLow Power Consumptiondevelopment board based on nRF52840 and

SX1262, supports LoRa and Bluetooth 5.0 .

which integrated various power interfaces

(5V USB, lithium battery and solar panel)

optional 1.14 inch TFT display and GPS

module as accessories, and has powerful

long-distance communication capabilities,

scalability, and low power design.
With Heltec nRF52 development environment and libraries. you can use it for LoRa/LoRaWAN development work, and also use it to run

some open source projects, such as

Meshtastic.

Main
Features

ESP32-S3FN8+SX1262+UC6580 Chipset, supports Wi-Fi, LoRa, Bluetooth, GNSS.
Low power design of dual-frequency multi-system based on 22nm technology.
Supports L1 + L5/L2, supports GPS, GLONASS, BDS, Galileo, NAVIC, QZSS multi-system joint positioning.
Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures.
Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching).
Onboard Wi-Fi, Bluetooth dedicated 2.4GHz metal spring antenna, reserved IPEX (U.FL) interface for LoRa and GNSS use.
Onboard 0.96-inch 160*80 dot matrix LCD display, which can be used to display debugging information, battery power, and other information.
Support the Arduino development environment.

Perfect Arduino-Compatible!
CE and FCC certification;
Based on ASR605x (ASR6501, ASR6502), those chips are already integrated the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262;
LoRaWAN 1.0.2 support;
Ultra low power design, 21uA in deep sleep;
Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching);
Good impendence matching and long communication distance.
Onboard solar energy management system, can directly connect with a 5.5~7V solar panel;
Micro USB interface with complete ESD protection, short circuit protection, RF shielding, and other protection measures;
Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing;
Onboard 0.96-inch 128*64 dot matrix OLED display, which can be used to display debugging information, battery power, and other information
Ultra low power design, 21uA in deep sleep;
Use Air530 GPS module, GPS / Beidou Dual-mode position system support;

MCU nRF52840 (Bluetooth), LoRa chipset SX1262.
Powerful display function (optional), onboard 1.14 inch TFT-LCD display contains 135(H)RGB x240(V) dots and can display up to 262k

colors.
Low power consumption, 11 uA in deep sleep.
Operation condition: -20 ~ 70℃, 90%RH(No condensing).
Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures.
Compatible with Arduino, we provide development frameworks and libraries.
Various Interfaces: 1.25*2P LiPo connector, 1.25*2P Solar panel connector, 1.25*8P GNSS module connector, which greatly increase the extensibility of the board.