Huepar P04CG 4D Laser Level Self Leveling 4D Green Beam Bluetooth Laser Tool Remote Control Li-ion Battery & Hard Carry Case

• Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW power output

• Laser Wavelength: 505-520nm

• Horizontal/Vertical Accuracy: ±3 mm at 10 m/±1/9 inch at 33Ft.

• Leveling/Compensation Range: ±4°

• Working Distance (Line): 40m/130Ft (100 LUX), 60m/200Ft. with Huepar Receiver LR-5RG/LR-6RG

• Operating Time with Li-ion Battery: 7 hours with all laser beams on

• Power Source: 10.8V / 2600mAh Li-ion battery

• Package: Hard Carry Case

• IP Rating: IP54 dust-proof, waterproof and shockproof, reliable and tough

• Operation Temperature Range: 14℉ ~ 122℉ (-10℃~ 50℃)

• Mount Size: 1/4″-20

• 1 x Huepar P04CG 4D Cross Line Laser Level

• 1 x Bluetooth Remote Control

• 1 x Rechargeable Li-ion Battery

• 1 x Power Adapter

• 1 x Type-C cord

• 1 x Magnetic Bracket

• 1 x Steel Sheet

• 1 x Laser Target Plate

• 1 x Hard Carry Case

• 1 x User Manual

• Bluetooth connectivity enables to control the setup of the laser from across the room with Huepar App on smart phone or remote control.
• The App and remote control can switch ON/OFF the laser lines and pulse mode, select the laser planes. Huepar App also provides out-of-level alarm. The laser tool can connect two Bluetooth devices simultaneously.
• With the remote control, your alignment job becomes simple and fast.

Large capacity Li-ion battery&Two Power Methods

• 10.8V / 2600mAh Li-ion battery and provides 7 hours running time.

• The Li-ion battery pack can be quick to release and install is very easy to use.The Li-ion Battery can be charger separately and the four power indicators on the battery allow users to know the charging status.

• When taking out the battery, the cross line laser level can be used at the job site by plugged in directly.

• With Type-C charging port, the laser level can also be charged by phone, laptop, power bank, car charger, etc.

• Charging protection help prevent the tool from overcharge.

Multifunctional laser tool

• Huepar Laser Level have two horizontal 360° plane, two vertical 360° planes, 16 laser lines, which can cover the floor, walls and ceiling all around the room.

• Horizontal lines and vertical lines cross at 90°angles help you to visualize quickly and finish square layout.

• Each button on this laser level corresponds to a single laser line, you can easily choose to turn on/off any laser line.

Self-leveling mode&Manual mode

• Self-leveling mode:When the pendulum slides to the“ ON” position, the self-leveling mode is enabled. The laser beam will beep as well as the laser beam blink fast when the tool is out of self-leveling range ±4.

• Manual mode:When the pendulum is in the middle position, the laser tool can be placed for use at any angle.The laser beam will blink every 3-5 seconds to remind you it's not self-leveling now.The locked icon will be displayed on Huepar APP to remind user it is in manual mode now.

Multi-function magnetic bracket

• This green line laser offers 1/4″-20 and mounting threads for being fixed on tripod or magnetic bracket.

• The strong magnetic bracket allows for quick positioning to metal surfaces helping hang the laser level for wall applications and can be rotated to the required angle.

• The magnetic base also has 1/4″-20 & 5/8″-11 mounting threads to suit for different tripod threads.

Pulse Mode

• When connecting with Huepar APP and the Bluetooth Remote Control, the pulse mode can be switched ON/OFF via APP.

• Pulse mode extends the working range up to 200Ft in brighter working conditions when using with Huepar Line Laser Receiver.

• It is compatible with Huepar LR-6RG / LR-5RG Laser Detector only.

• Note: Keep the pulse mode on when using with a receiver.