>>>OVERVIEW
JJC LED-ARM2 Macro Arm Light adopts heat-free technology and consists of 2 LED lights specially designed to illuminate your close-up subjects in macro photography. Thanks to the cold shoe mount design, you can easily mount onto a camera by gently sliding the code shoe into your hot shoe and then rotating the locking knob clockwise to secure it to install. The dual flexible arms are constructed of metal and wrapped by soft silicone, providing a comfortable hand feeling. It is adjustable to different angles to shed light where you need it, suiting your different lighting needs.
>>>FEATURES
1. Dual flexible arms are adjustable and bent easily to shed light where you need it;
2. Max. length of the flexible arm is 11.4″/ 290.2mm;
3. The LED Macro Arm Light adopts heat-free technology, quick heat dissipation;
4. Three lighting modes and ten adjustable brightness levels. Allows setting the brightness level of each LED light separately in double lights mode;
5. Display screen shows the lighting modes;
6. It has a built-in 600mAh battery, and can be charged with a USB Type C data cable (included).
>>>CHARGING&LIGHTING TIME
Charging Time: Around 2 Hours
Maximum Lighting Time: 13 Hour 30 Minutes(the Lowest Brightness Level of Double Lights Mode);
Minimum Lighting Time: 1 Hour 25 Minutes(the Highest Brightness Level of Double Lights Mode).
>>>COMPATIBILITY
The JJC LED-ARM2 Marco Arm Light is compatible with most DSLR/ Mirrorless cameras with standard hot shoe, here are some models for your reference:
Canon:
EOS R, R3, R5, R6, R7, R10, RP, Ra
EOS M50, M200, M100, M6, M5, M3
EOS 1D series, 5D series, 6D series, 7D series; 90D 80D 77D 70D 60D; 850D 800D 200D 200DII; 1500D 1300D 3000D
EOS Rebel SL1 SL2 SL3; T8i, T7, T7i, T6, T6i, T6s, T5, T5i…
Nikon:
Z5, Z6, Z6 II, Z7, Z7 II, Z50, Z fc, Z9, Z30;
D850, D810, D780, D750, D610, D500
D7500, D7200, D5600, D5500, D5300, D3500, D3400…
Sony:
A7 series, A7R series, A7S series, A9 series, A99 series
A7C, A6600, A6500, A6400, A6300, A6100, A6000…
Fujifilm:
X100V, X100F, X100T, X100S, X100,
X-T1, X-T2, X-T3, X-T4, X-T5,X-T10, X-T20, X-T30
X-E4, X-E3, X-PRO1, X-PRO2, X-PRO3, X-S10, X-A10…
Olympus:
OM System OM-5, OM-1, OM-D E-M10 series, E-M5 series, E-M1 series…
and more DSLR/ Mirrorless cameras with standard hot shoe.
>>>Q&A
Q1: Does this work with sony DSLR cameras?
A1: Yes, this item fits most DSLR/ Mirrorless cameras with standard hot shoe.
Q2: What is the effective distance of this light?
A2: We recommend that the shooting distance should not exceed 1 meter. Within 30cm, you will get the best shot.
Q3: How long does it take from full charge? How long can it be used in a fully charged state?
A3: It takes about 2 hours to charge with a 5V/1A charger; When you use the lowest brightness, it can be used for about 13.5 hours; When you use the highest brightness, it can be used for about 1.5 hours.
>>>USER'S GUIDANCE
Step 1 : Power On & Power Off
Press and hold the Mode Switch for about 3 seconds to turn on the LED light;
Press and hold the Mode Switch again for about 3 seconds to turn off the LED light.
Step 2 ：Mode Switching
Short Press the Mode Switch to switch the different lighting modes.
*The LED light supports three lighting modes, “left Light – Right Light – Double Lights”, circularly playing.
Step 3 ：Adjust The Brightness
The LED light supports ten brightness levels adjustable in each lighting mode.
1.Short press the Brightness “-” Button to reduce the brghtness of the LED light;
2.Short press the Brightness “+” Button to increase the brightness of the LED light.
Tip:
*The LED light will flash three times when the brightness reaches the lowest or highest level.
*Press the Mode Switch three times to switch to the default mode of “Double Lights” Fifth Level – Fifth Level.
*Turn off the LED light in any lighting mode and then turn it on again, the LED light has a memory function (memory of the lighting mode and the brightness level at the power-off moment).
