KERUI P6 Welcome Alarm Chime Wireless Security Protection Infrared IR Motion Sensor Door bell Alarm Doorbell+Remote Controller
120 DB Sound LED Flash Alarm
External Speaker
There is one external strobe siren port on the side of the host, which is to raise the alarm sound volume when alarm
acousto optic alarm ，scare away Intruder
Detection Distance：<8m
Detection angle up to 110 degrees
Remote Control
Welcome And Alarm Mode
P6 Alarm is Widely used in family ,hotel,restaurant,cafe,bank,store,company,factory,and so on.
Installation and Usage of Door Sensor
Door sensor is used for sensing the closing and opening state of the door, and is consisted of transmitter and magnet two parts. It can be installed on doors,windows or any object that can be closed and opened. When transmitter isseparated from the magnet, door senser will send alarm signal to alarm panel,host will alarm.
Installation and Use of PIR Motion Detector
Before use, make sure the power switch of PIR motion sensors is ON. Installation height is about 2.2 meters above ground and it should be installed in the cornerof the room to get the best detection range. At the same time, it should form a certain angle with the walking line ( 90 degree angle is best for detection)
the host can add 40 different coding detectors and can program 20 different coding emergency detectors
Low Battery Reminder
When battery power is low, the light flash one time each 40s, “DIDIDI”beep accompanying.
