KERUI Wireless Home Alarm Siren System Security Alarm System For Home House PIR/Door Sensor Easiest Design
General Introduction
-
Door alarm uses remote control to set security code for arming/disarming;home security system complete with fully programmable main unit and sensors,later if you want to DIY,please restore factory first as manual,then add them again or search operation video on youtube”KERUI Standalone Alarm System Operation Guide”for reference.
-
DIY expandable home burglar security alarm system-this alarm horn support up to 40 pcs wireless detectors,10 remote keyfobs,10 doorbell buttons,loud up to 110db deluxe door alarm system for peace of mind.
-
Complete DIY wireless house burglar alarm system kits includes a horn and two window/door sensors,two remote controls,a pir motion detector, loud alarming to protect well for apartment shed hotel garage safety,affordable home security.
-
Loud SOS alarm and easy to get help-children and seniors at home in emergency,press the SOS button of the remote controller,which will trigger the siren alarm up to 110db to notice neighbors or other families in home so that they will get help in time.
-
Technical parameters:
1: size: L * W * H 12mm * 10.2mm * 11mm
2: Power: AC 110V ~220V,the length of the power cable is about 92cm/3ft,can be extended by yourself.
3: the wireless operating frequency: 433MHz
4: the use of the environment stability: -15 ~55,relative humidity: 40% -70% -
The normal workable distance from the sensors to the horn (host) is about 328 feet (100 meters)in open area,barriers will lessen this distance.And if you are closer to siren/control unit,it loud up to 110db,the longer the distance,the decibel will be reduced,hope you can understand.
-
The burglar alarm system comes with fully programmed,do not have to program anything,after you get it,open each sensor(excluded remote control ) and pull out the little paper tab near the battery so it then powers up the unit,install the PIR sensor and door/windor sensor in somewhere need to protect,the siren horn is powered by a 110 V to 220 V AC adapter,plug it in outlet,will hear beep,then use the remote key fob to arm or disarm the system along with the alarm horn will beep to remind you it in working(arm/disarm) status;in arm status,when doors open even a little or motion sensor detect objects, horn screams up to 110db scare off intruders and alert you or your neighborhood of a possible break in.
-
Note:
1,If there are false alarms,please restore to factory setting first,then follow the operation guide to re-setup them by yourself;or you can change new batteries of sensors.
2,The loud siren host alarm without flashing,also the alarm time and volume can't be adjusted,when the sensor is triggered,the siren will alarm at once,if no one disarms the siren,it will keep alarming about 2 minutes and stop automatically,then it's will be in disarm status till you arm it.
3,If you want a more louder alarm system,you can add more and more black horns work with same set wireless sensors, you also can choose another type live sound host or smart app control host of KERUI brand together work with same sensors.
4.Remote Control(with DC12V Battery Included)
Operation Current:10MA
Operation Freq:433MHz
2262 Learning Code
Work of Alarm System
4 Button:Arm Away Mode, Arm At home Mode, Emergency Mode and Disarm Mode)
Sending Distantce:Outdoor 80~100M(no obsctale), Indoor:8~10M
Operation Temp: -10C~50C;Humidity:90%
Package include:
1x Host Speaker
3x Door/Window Sensor
2x Motion Detector
2x Remote Control
1x AC Adapter(will ship the right one according to your countries)
1x English Manual
