Overview
◆ Large capacity amplifier
◆ Automatic limiting output, short circuit, overload, over temperature, power-on delay and other protection functions
◆ The power amplifier is equipped with a delay start system to protect the speaker from collision damage
◆ The rear panel is equipped with dual channels,
◆ Balanced input interface
◆ TALK output connector
◆ 483MM standard rack structure
◆ The switching power supply section of the power amplifier section has a separate cooling system
◆ The cooling fan is controlled by an advanced stepless speed changing circuit
◆ 1U design, light body, easy to carry and install
Output/output (8Ω, 1kHz): 2x650W 4x650W
Output/output (4Ω, 1kHz): 2x1300W 4x1300W
Frequency response/frequency response: 20Hz ~ 20kHz ± 3dB
Total distortion/total distortion:
1% (at 8Ω, 350W)
Input sensitivity/input sensitivity: +4dB * (1.23V)
Input impedance/input impedance: 10kΩ (electronically balanced/balanced)
Signal to noise ratio/S/N ratio: ≥ 80dB
Connection Terminal Connector:
Input (CH1-2): XLR input connector; Output (CH1-2): SPEAKON output; Power supply: AC Input (CH1-2): XLR input connector; Output (CH1-2): SPEAKON output; power: AC power supply.
Screen Light Indicator Light:
Power indicator x 1 (green); Input indicator x 2 (yellow); Peak indicator x 2 (red); Protection circuit action indicator x 1 (red), power indicator x 1 (green), input indicator x 2 (yellow), peak indicator x 2 (red); Feedback protection indicator x 1 (red)
Supply voltage/Supply voltage:
AC110 ~ 120V, 50/60Hz AC220 ~ 240V, 50/60Hz (Use internal jumper to switch/Via indoor jump switch)
1/8 Rated activity consumption power: 50W, 80W, 110W
Working temperature range: 0 ~ 50 ℃
Operating Humidity Range:
Below 90% RH/Below 90% RH (but no condensation/But it may not be condensation)
The above parameters are for reference, the product can be upgraded
