• Two-Way Control Box :The two-way control box allows you to control the camera from both the front and rear of your car, making it easier to monitor your surroundings.
• Manual Switch :The manual switch allows you to turn the camera on and off easily, without having to go through any complicated settings.
• Wireless Connectivity :While the camera does have a wire, it can be easily connected to your car's electrical system, making it hassle-free to install.
• Rear View Camera :The rear view camera provides a clear view of what's behind your car, making it easier to reverse and avoid accidents.
Functions:
-
1. Automatic front view when staring:
When the engine is started, the system activates the monitoring machine and the front camera to check the front view for 8 seconds then turn it off.
-
2. Automatic rear view:
-
3. Front view always activate mode:
Push the control switch to enter the front mode.
In this mode, the system will monitor and activate the front of the camera at all times.
Exit the mode by pressing the control switch again.
Working priority: Rear view > Front view
Front view camera: presented by the remote control system.
Rear view camera: submitted by the control system or can be activated by being in reverse.
Specification:
-
Power: max: 50MA, 12V.
-
System signal: PAL / NTSC
-
Video output: 1.0VPP / 75Ω
-
Operating temperature: -20℃ to 80℃
Package Included:
-
1 x Parking Camera Video Control System
Front & Rear View Control Box
Two-Way Channel Converter | Manual Switch
SIZE DIFFERENCE
BOX SPECIFICATIONS
COMPATIBILITY WITH KINDS OF CAR MONITOR
CONNECTION METHOD
①Switch
②Reverse Trigger
③GND-
④Acc Dc 12V
⑤Rear Camera Power Supply
⑥Rear Input
⑦Monitor Trigger Power
⑧Video Out(To Monitor)
⑨Front Camera Power Supply
⑩ Front Input
Car Wiring Diagram
Easy Installation
ACCESSORIES LIST
