LAUNCH BST 360 Bluetooth Battery Tester 6V 12V Car Motorcycle Battery Analyzer Load Cranking Charging Diagnostic Tool PK BM550

LAUNCH X431 BST360 Battery Test Clip Analyzer 12V 2000CCA Voltage Battery Test Car Battery Tester Charging Load Tools

1.Identify battery status Good or Replace

2.Check Battery Capacity – Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating

3.Check Internal resistance value (Ohm)

3.Display battery life in percentage (%)

4.Battery Cranking Test, load test

5.Battery Charging Test, Ripple Test

6.Support battery ripple test and review test data

About Gifts:

Please note that all gifts will be sent after you give us a positive review. Please contact the seller promptly after leaving five stars.

LAUNCH BST360 Car Bluetooth Battery Tester is a new generation of 6V/12V lead-acid battery test clip that supports Bluetooth wireless communication. It is used for measuring the actual Cold Cranking Ampere(CCA) of the car starter battery, analyzing the battery health, and detecting the starting system and the charging system of the car.

LAUNCH BST360 Support 9 Language

Chinese, English, German, French, Russian, Italian, Japanese, Spanish, Portuguese

Work on LAUNCH X431 Serial Product : Language support depends on the languages supported by X431 V series products

LAUNCH BST360 Car Battery Really easy to Connect

1). First clamp the BLACK and clips of the battery tester on the Negative (-) and Positive (+) terminals of the vehicle battery respectively.

2). Open BST360 App.

3). In the pop-up Bluetooth list, select the Bluetooth name (starting with BST360xxx) of the battery tester to be paired.

4). After pairing, it can be used normally.

NOTE:

Launch-specific: The LAUNCH X431 Scanner needs to be equipped with the BST360 module.

Phone: Go to Google play (for Android) or App Store (for iOS) and input “BST360″ in the search bar to download and install it.

1.Support work for Smart Phone(including IOS phone , Android )

2.Support work for LAUNCH X431 Serial product ,inlcluding X431 V , X431 V+ , X431 PRO , X431 PRO3S, X431 PRO3S+ , X431 PRO MINI , X431 PAD V , X431PAD II , X431 PAD III , ect

LAUNCH BST360 Battery Tester Features:

1. Support Bluetooth wireless automatic connection
2. Support X431 series and mobile phone multi-terminal device support
3. Small size, easy to carry
4. Immediately use, no heat, no sparks, no operational risks
5. Support common battery standards, such as CCA、BCI、CA、MCA、JIS、DIN、IEC、EN、SAE、GB
6. Support common battery types, such as ordinary battery (Regular Flooded), AMG start-stop battery (AGM Plate), GEL start-stop battery (GEL), EFP start-stop battery (EFP)
7. Support report printing, Bluetooth sharing
8. Support Chinese, English, German, French, Russian, Italian, Japanese, Spanish, Portuguese and other languages
9. It has the function of reverse polarity protection, and the reverse connection of the clip will not damage the tester, nor will it have any adverse effects on the car and the battery
10. You can directly test the battery that is losing power without having to fully charge it before testing
11.Upgrade cost: free
12. Test voltage range: 6V~16V
13.Test capacity range: 30AH-80AH
14.Cable length: about 56cm

Launch BST360 Bluetooth Battery Tester Supports All 6v and 12V Lead-acid Battery Testing

6V, 12V (Lead-acid battery, GEL battery and AGM battery)

Support common battery types, such as ordinary battery (Regular Flooded), AMG start-stop battery (AGM Plate), GEL start-stop battery (GEL), EFP start-stop battery (EFP)

Standard — Description — (Testing Range )
CCA、BCI、CA、MCA、JIS、DIN、IEC、EN、SAE、GB

CCA — Cold Cranking Amps, as specified by SAE. The most common rating for cranking batteries at 0°F (-18°C).— (100-1100 )

CA — Cranking Amps standard. The effective starting current value at 0°C (32°F). — ( 100-1100 )

MCA — Marine Cranking Amps standard. The effective starting current value at 0°C (32°F). — (100-1100 )

JIS — Japanese Industry Standard, shown on a battery as a combination of numbers and letters.— ( 26A17–245H52 )

DIN — Deutsche Industrie-Norm. — ( 100-1100 )

IEC — International Electro technical Commission. — ( 100-1100 )

EN — Europa-Norm — ( 100-1100 )

SAE — Society of Automotive Engineers — ( 100-1100 )

BCI—American Battery Council International ( Publishes Automotive Battery Standards)

LAUNCH Car Battery Test Report

Including Battery Health test , Smart System Test, Charging Health and Test report

Battery Health Test

It mainly analyzes the health status of the car battery, calculates the actual cold start capacity of the battery, and judges the aging degree of the battery, so as to provide a reliable analysis basis for the inspection and maintenance of the car battery.

Smart System Test

It is mainly to detect and analyze the starter motor of the car, and detect the actual starting current and starting voltage of the starter motor, so that it can be judged whether the starter motor is normal.

Charging Health Test

Let you know the output voltage of the generator ,the rectifier diode and charging current.Moreover, it analyze the state of the charging system and battery through the above data, provide you with an accuraye charing system test

Test Report

Including Battery Health test , Smart System Test and Charging Health Test report

Really Easy to Connect LAUNCH BST360

LAUNCH BST360 parameters

Connection method: Bluetooth connection
Test voltage range: 11~16V
Measuring capacity range: 30AH-80AH
Working temperature: -10~50℃
Storage temperature: -20~60℃
Cable length: about 56cm

Packing List