Self-powered wireless remote control switch
This is a self-powered wireless remote control switch that does not require a battery and can be used directly after buying it. The appearance is beautiful and elegant, and it is the best choice for switches.
What is a self-powered switch?
The self-powered wireless switch presses itself to generate electricity, no wiring at all, no battery power supply, self-generated electricity for self-use, energy-saving and environmentally friendly patented product, press life more than 100,000 times, use with self-generating receivers. No wiring from lamp (electric equipment) to switch
Advantage
1. Save wires and save labor, no risk of electric shock and combustion without contact with strong electricity, no heat source inside and no temperature rise influence;
2. One lamp holder can be matched with multiple free sticker switches at the same time to realize that one lamp can switch the lamp in multiple places! Solve the problems of no switch on the bed, turning on the lights at night, unreasonable circuit design, inappropriate switch height for the elderly and children at home, and inconvenient wiring at home because of aging wiring!
3. After a power failure, the power will self-extinguish to avoid waste of electricity and will not interfere with each other. It adopts digital coding and decoding technology and has no directionality; high-performance processing chip, built-in relay control, safer and more stable, super heterodyne receiving module ultra-low power consumption Strong anti-interference and high sensitivity!
Function 1: IP44 Waterproof Switch
Can turn it on in the wet environment,No risk electric shock
Function 2: Wireless Self-power Switch,No batter required
Wireless Self-power Switch,No batter required,Generation rocker push button with the self-generating feature.
Function 3: Strong wireless signal
Control the light in the room,even outside the room
Function 4: The receiver is small and easy to install
The receiver is small and easy to install,can be placed behind the switch.
How to wire
Input and output cannot be reversed.
How to pair signal and clear the signal?
Pair the signal:
1.press and hold the learning button for 3 seconds until the indicator light flashes
2.Press the wireless switch 1 times,the indicator light flashes,succesful
Clear the signal:
Press and hold the leaning button for 12 seconds until the indicator light flashes 3 times quickly,the code clearing is successful.
NOTE:
This product is a set product. Buying any parts separately may cause the product to be unusable. If you don't understand, please contact our customer service.
