DC 5-24V 5A Low Power 5.8Ghz Microwave Radar Sensor Switch Controller
Product overview
When someone enters the sensor and meets the lighting demand, the microwave switch will automatically turn on, and the load device will start working and start the delay system. As long as the human body does not leave the sensing area, the load device will continue to work. When the human body leaves the sensing area, the sensor begins to calculate a delay. When the delay ends, the sensor switch automatically closes and the load device stops working. Truly achieve safety, convenience, intelligence, and energy efficiency
Features:
1.sensitive sensing, accurately distinguishing the movement of living and non living organisms, minimizing the rate of misoperation
2.strong anti-interference: Using a working frequency of 5.8ghz, with little external natural influence factors, stable and reliable performance
3.automatic metering: Automatically recognizes the intensity of ambient light, meets lighting requirements, and lights up when there is someone present, otherwise it does not light up
4.fully automatic sensing: Automatically turn on the lights upon sensing a person, turn on the lights when they come and turn off when they leave, safely save electricity, and are not affected by external factors such as sound or objects
5.wide range of use, suitable for stairs, corridors, cabinets, courtyards, parking lots, etc
Parameters:
●. Product model: TIP-2303
●. Working voltage: DC5-24V
●. Working current: maximum 5A
●. Standby power consumption: 0.02w
●. Transmission power:<10ma
●. Working frequency: 5.8ghz
●. Sensing distance: 5-8 meters
●. Work delay: 30 seconds
●. Dimming: no
●. Connection method: DC5521 (male input, female output)
●. Load Output power: ≤ 25W (5V); ≤ 60W (12V); ≤ 120W (24V)
Matters needing attention
1.please disconnect the power supply before installation to avoid danger
2.the product is not waterproof, please pay attention to moisture-proof and waterproof measures
3.the microwave Radar Sensor Switch angle is 360 degrees, please pay attention to the installation method
4.high voltage electricity inside the product. Non professionals are not allowed to disassemble or disassemble it, otherwise the consequences will be borne by oneself
Package include
Radar Sensor Switch * 1
