MUCAR VO6 OBD2 Scanner 2024 New OE-Level Full System Automotive Scan Tool Oil/ABS 28 Free Resets Car Diagnostic Scanner Tool

MUCAR VO6 CAR SCANNER – Real Full System Diagnosis + 28+ Life-time Free Resets + TPMS Functions Automotive Tools Diagnostic Scanner Free Update

【OE-level All System Diagnosis】 Scan all the on-board system and read ECU information to receive fault code and then execute further analyze and maintenance.

【28 Service Functions Lifetime Free】Oil Reset, EPB Reset, SAS Calibration Reset, BMS Service, DPF Regeneration, TPMS Reset, ABS Bleeding, IMMO Key, Sunroof, Suspension, AFS Headlamp Reset, Injector Coding, Throttle Adaptation, and etc.

【Unlock Bidirectional Control and ECU Coding】Bi-Directional Control and ECU Coding are optional subscribed by 49.95/year/car brand. Upgrade your device to a full-system, full-function softwares.

【Auto VIN Technology】 Skip the manual input and automatically receive vehicle make, model, year, and other information.

【Worldwide Coverage】Work on 122+ Car Brands, 20,000+ Cars on American, Asian, and European vehicle models.

【Support 20 Languages 】English, French, German, Italian, Spanish Portuguese, Japanese, Russian, Polish, Dutch, Hungarian, Slovak, Greek, Slovenian, Korean, Chinese Traditional, Swedish, Turkish, Czech, Indonesian

OE-level All System Diagnosis Lifetime Free

Mucar VO6 diagnostic scan tool can access ALL available vehicle ECU systems and read ECU information to facilitate the vehicle diagnoses such as ECM(Engine System), ABS(Anti-Lock Brake System), SRS(Airbag System), TCM(Transmission System), TPMS(Tire Pressure Monitor System), SAS(Steering Angle System), BCM(Body Control System), EPB(Electric Park Brake System), EPS(Electric Power Steering System), AC(Air Conditioning System), IC(Instrument System) and Security System. Fast Scan and Read/Clear fault codes in seconds, effectively turn off the warning light.

Mucar VO6 can perform DEEP Scanning on other important Subsystems & ECU Modules: Immobilizer/Key Coding/Cruise Control/Instruments/ Self Leveling Suspension systems/Seats/Doors/Gateway/Air Suspension/Body Systems/Electronic Power Steering & Motor Assisted/Power Steering/Tyre Pressure/Rain Sensors/4WD System/Stabilizer/Intelligent Parking Assist/Door Motors/Audio Systems/Tiptronic/Anti Theft/Soft Top/Headlamp Leveling/Central Locking/Automatic Clutch/ DPF Reset/Electric Windows/Plip coding/Heated Rear Window/Xenon Headlights/Wash Wipe/Fuel Burning Heater/Transfer Box/Seat Memory/Oil Life Service Reset/Sliding Doors/Electronic Throttle/Navigation System/Rollover Sensor/Cruise Control/ Multi Function Steering Wheel/Aux Heating/Electronic Parking Brake/Clutch Electronics, etc.

Choose subscribe Special Functions(49.95USD/YEAR/MAKE) Makes VO6 Be A Professional Scan Tool – Suitable for Advanced DIYer and Professional Mechanics

Active Tests/Bidirectional Control (Special Functions)

Also called “actuation testing”, bidirectional control allows the mechanic to activate or test mechanical components on demand. This process tells you if individual actuators, valves, and pumps function the way they should, allowing for more efficient and effective repairs.

ECU Coding (Special Functions)

Helps *Re-flash the hidden functions of vehicle control modules to achieve personalization, and helps *Initialize, match and reprogram adaptive data for certain components (ECU/modules) after making repairs or replacements.

Support 28 Reset Services Lfietime Free

1.Oil Lamp Reset Service

Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

2.EPB Electronic Park Brake Reset

It is important in the maintenance of electronic braking system's safety and efficiency.

3.BAT battery service

Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

4.DPF Diesel Particulate Filter Reset

Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

5.SAS Steering Angel Sensor Reset

Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

6.TPMS Tire Pressure Monitoring System Reset

Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

7.IMMO Matching

In order to prevent the car from being used by illegal keys, the IMMO matching function enables the anti-theft control system on the car to identify and authorize the remote key, so that the car can be opened and used normally. When the car changes the ignition switch key, ignition switch, integrated dashboard, engine control unit (ECU), body control module (BCM) and remote control battery, the IMMO matching is required.

8.ABS Bleeding

ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

9.Sunroof Reset

The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

10.Suspension Reset

Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

11.Gearbox (Transmission )Reset

Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.

12.AFS Headlamp Reset

'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

13.Injector Coding

Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

14.Throttle Adaptation

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.

15.Gear Learning

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

16.EGR Reset

Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.

17.A/F Reset

This function is applied to set or learn Air/Fuel ratio parameters.

18.Adblue Reset(Diesel Engine Exhaust Gas Filter)

After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.

19.Airbag Reset

This function resets the airbag data to clear the airbag collision fault indicator.

20.Coolant Bleeding

Use this function to activate the electronic water pump before venting the cooling system.

21.AT Learning

This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift

22.Language Change

This function is used to change the system language of the vehicle central control panel.

23.Nox Sensor Reset

Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.

24.ODO Reset

a) ODO reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage.
b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it
is necessary to do ODO reset after maintenance.

25.Stop/Start Reset

This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).

26.Seat Calibration

This function is applied to match the seats with memory function that are replaced and repaired.

27.Transport Mode

ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.

28.Windows Calibration

This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.

If you can't confirm the compatibility of these features, please don't worry, we can provide the compatibility list and real-time inquiry, and you will get the accurate answer within 6 hours at the earliest.

Support 126+ Car Brands and 1000+ Vehicles

For America car models —— FORD,LINCOIN,GM,BUICK,CADILLAC,CHEVROLET,CHRYSLER,DODGE,JEEP,HM

For Europe car models —— BENZ,SMART,SPRINTER,BMW,VW,SKODA,AUDI,OPEL,LAMBORGHINI,PORSCHE,MAYBACH,EURO FORD,LANDROVER,DR,BENTLEYRollsRoyce,ROVER,MINI,VAUXHALL,FERRARI,FIAT,Abarth,LANCIA,Alfa,Romeo,Maserati,BUGATTI,PEUGEOTCITROEN,RENAULT,SAAB,VOLVO,OPEL,Dacia,SEAT;

For Malaysia car makes —— PERODUA(PERODUA), PROTON;

For Iran car makes ——IKCO, MVM, SAIPA;

For Australian car makes —— Austford, Holden ;

For India car makes ——TATA, MARUTI, MAHINDRA, India HM;

For Russia car makes—— GAZ, VAZ;

For Brazil car makes ——FIAT; GM;

For Asian car makes ——SAMSUNG,DAEWOO,SSANYYONG,HYUNDAI,KIA,HONDA,Acura,TOYOTA,SCION,LEXUS MAZDA,NISSAN,Infiniti,JPISUZU,TLISUZU,DAIHATSUSUZUKI,MITSUBISHI,SUBARU,CHANGCHENG,HUACHEN,ZHONGXING,JACTY,QIRUI_TY,ISUZU,JINLONG,CHANGAN,LIUWEI_TY,XINKAI,JPISUZU,ZHONGSHUN,HAOQING,HAFEI,XIALI,CHANGHE,ZHONGTAI,Kowloon,Brilliance,LIFAN,WEILI,FLYER,SSANGYONG,JIAO,WEILI,LUXGEN.BYD,CHERY.ZOTYE.etc.

Note:It can support about 126 car brands, the details page only lists some models, other models can consult the store customer service.

Support 20 Languages

English, French, German, Italian, Spanish Portuguese, Japanese, Russian, Polish, Dutch, Hungarian, Slovak, Greek, Slovenian, Korean, Chinese Traditional, Swedish, Turkish, Czech, Indonesian

Built-in Full OBDII Function(LIFETIME FREE)

1）Read Codes—Knows what and where the problem is according to the DTC and its definition.
2）Clear Codes—Clear the DTCs and turn off the warning lights after code reading and certain repairs.
3）Live Data—Request current powertrain diagnostic data. 4 data streams can be merged in 1 graph for easier comparison.
4）Freeze Frame—Request freeze frame information. Find the data at the time of the car failure.
5）O2 Sensor Test—Request oxygen sensor monitoring test results.
6）On-Board Monitor Test—Request on-board monitoring test results for specific monitored systems.
7）I/M Readiness—Request emission-related diagnostic trouble codes detected during current or last completed driving cycle
8）EVAP Test—Start the leak test of the vehicle's EVAP system (This tool does not perform the leak test, but sends a signal to the vehicle's on-board computer to start the test.)
9）Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10）DTC Lookup

One-Click WIFI Free Update Lifetime

Reading Codes

Show the detailed description of the Diagnostic Trouble Code (DTCs)

Erasing Codes & Reset

Turns off Check Engine Light (MIL), clears codes and resets monitors.

Data Stream

Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

I/M Readiness Status

Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Print Via PC & Ready Support

The health report which takes all system error codes, interprets them, and actually shows you possible causes and potential fixes. You can share and print the diagnosis report via PC. Mucar support is top notch so you won’t be on your own if there’s ever an issue with your new OBD2 scanner.

MUCAR VO6 extension modules!Thinktpms G2, Battery Tester, Printer, oscilloscope, Endoscope

Note:These extension modules require additional purchase. If you need these modules, you can purchase them on the THINKCAR website.

Optimized High-end Configuration

1) Display Screen ：6.0-Inch/TFT(IPS)
2) Connection :Wi-Fi/Bluetooth
3) RAM:2G
4) ROM:32G
5) Working Temperature : 32℉~122℉
6) Storage Temperature: -4℉~144℉
7) Battery Capacity : 6400mah
8) Function : Android 10.0 ,Wireless Diagnose

MUCAR VO6 Car Repair Tool Button Introduction

Packing List

1*MUCAR VO6 Scan Tool
1*Diagnostic dongle
1*Charging cable
1*Three in one power adapter(Suitable for EU plug, US Plug and UK Plug)