Product features:
1.This controller can control wind turbines to charge the battery automatically.When the battery is fully charged, brake can be controlled automatically by the interior circuit. When the battery voltage drops to restore voltage level, wind turbine can automatically recover to the battery charging, so as to protect the wind turbine and the battery.
2.MPPT electrodeless and noiseless unloading. Voltage and current limiting are be enabled during recharging to ensure the best charging effect. Meanwhile, it provides the maximum protection to the wind turbine and battery.
3.Unique reverse connect protection circuit. For improper operation the positive and negative of battery, don't need to replace the fuse, only to reset the positive and negative in correct point. So the whole system will be more reliable.
4.With the independent intellectual property rightsof modular design, which makes the performance of the whole system to get the biggest safeguard. Rectification of this controller and braking circuit part, have adopted the company design integration module, no matter from heat, or reliability, further than the traditional design.
5.The comprehensive waterproof protection.If the controller without waterproof but used in easy ooze water environment or the humidity isheavy, then the controller is easy to be corroded and damaged. Our product adopts full seal completely waterproof design which adapt to the heavy humidity, salinity, such as ground water operational environment. The protection grade reaches the IP68 above, even in water can steadily work normally for a long time.
6. The bottom of the controller has a brand-new LED display light and display screen. When you connect the battery, you can see the battery voltage very intuitively, and you can keep an eye on the change of the battery voltage so that you can know whether your fan is charging the battery. Charge.
7. Support all battery type, such as “Lead Acid, GEL, Lithium and Lifepo4”
Controller parameter introduce:
Starting voltage:8V(12Vsystem), 17V(24V system) 35V( 48V System)
Battery voltage: Auto Match 12v or 24v battery ( GEL or lead acid battery) or 48V
Wind Turbine Braking Voltage: 14.5v (12v system), 29V( 24V system), 60V ( 48v system)
Wind Turbine Recover voltage: 12.5V/27V 54V( 48V system)
Controller Rate Power: 600W/800W
Controller size:10.4*9*2.3cm
Parcel weight: about 350g
