Warranty: Yes, 1 year warranty
Port Material: Metal and Plastic
Condition: In-stock, Brand-new, 100% test before send out
Features & Benefits: High accuracy, Hermetically sealed, Small size
Applications:
-
For Chrysler 300 2005-2011 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
-
For Chrysler Aspen 2007-2009 8 Cyl 4.7L, 8 Cyl 5.7L
-
For Chrysler Pacifica 2007-2008 6 Cyl 4.0L
-
For Chrysler PT Cruiser 2004-2010 4 Cyl 2.4L
-
For Chrysler Sebring 2004-2010 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
-
For Chrysler Town & Country 2004-2010 6 Cyl 4.0L
-
For Dodge Avenger 2007-2010 6 Cyl 2.7L, 6 Cyl 3.5L
-
For Dodge Caravan 2004-2007 4 Cyl 2.4L
-
For Dodge Challenger 2008-2011 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L, 8 Cyl 6.4L R/T, SE, SRT8
-
For Dodge Charger 2006-20126 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L, 8 Cyl 6.4L
-
For Dodge Dakota 2005-2011 6 Cyl 3.7L, 8 Cyl 4.7L
-
For Dodge Durango 2005-2009 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L
-
For Dodge Grand Caravan 2004-2010 6 Cyl 4.0L
-
For Dodge Journey 2009-2010 6 Cyl 2.7L, 6 Cyl 3.5L
-
For Dodge Magnum 2005-2008 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
-
For Dodge Neon 2004-2005 4 Cyl 2.4L SRT-4
-
For Dodge Nitro 2007-2011 6 Cyl 3.7L, 6 Cyl 4.0L
-
For Dodge Ram 1500 2005-2010 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L
-
For Dodge Ram 2500 2007-2010 8 Cyl 5.7L
-
For Dodge Ram 3500 2007-2009 8 Cyl 5.7L
-
For Dodge Stratus 2004-2006 4 Cyl 2.4L, 6 Cyl 2.7L
-
For Jeep Commander 2006-2010 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L
-
For Jeep Grand Cherokee 2005-2010 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L, 8 Cyl 6.1L
-
For Jeep Liberty 2004-2012 4 Cyl 2.4L, 6 Cyl 3.7L
-
For Jeep Wrangler 2005-2009 4 Cyl 2.4L, 6 Cyl 3.8L, 6 Cyl 4.0L
-
For Ram 1500 2011-2013 8 Cyl 4.7L, 8 Cyl 5.7L
-
For Ram 2500 2011 8 Cyl 5.7L
-
For Ram 3500 2011 8 Cyl 5.7L
-
For Ram Dakota 2011 6 Cyl 3.7L, 8 Cyl 4.7L
Oxygen Sensor's Location:
How do I know the O2 sensor is good or not?
-
Check engine light on
-
A reduction in fuel economy.
-
Your catalytic converter fails unexpectedly
-
Exhaust emissions reach undesirable levels.
How to install the oxygen sensor?
Step 1– Some sensors are equipped with a heat shield that must be removed before the sensor removal, this is performed by removing any mounting bolts.
Step 2– By using a regular socket it minimizes potential damage to the sensor body and the threads, this technique helps avoid stripping the old sensor upon removal.
Step 3– Then, locate and disconnect the wiring connector, this step should be done before removing the sensor if the wiring is still attached.
Step 4– Its important that the wiring harness connectors are exactly the same, each sensor is unique to it's position and is located in the system by its connector configuration. (Note: some replacement sensors have a universal electrical connector that must be configured to the wiring of the old sensor.)
Step 5– Use a small wire brush to help clean the threaded port to ensure a proper seal of the new sensor. Gently install the new oxygen sensor by hand while keeping the wiring and connector free from bends.
Step 6– Gently tighten the sensor while keeping wiring free from damage, these sensors need to be fairly snug to avoid leakage.
Step 7– Once the sensor is tightened, reinstall any heat shields or bracing that had to be removed.
Step 8– After the heat shield has been reinstalled, mount the connector to it's holder and reattach the connector back onto the wiring harness. If the car has diagnostic trouble codes, they will need to be cleared.
-
We accept Credit Card, Alipay, WeChat Pay, PayPal, etc.
-
If you want to pay by PayPal, please contact us. Thanks!
-
All products will be tested strictly before shipping. Please make sure your address in AliExpress is matched with your shipping address before you pay the order. And please make sure the mobile phone number and postcode is correct. In addition, Brazil and Chile customers please fill in the correct CPF number, so as to send your goods more quickly.
