Functions:
1.Turn on the engine:
Unlock the car,closed the door,depress the brake and the green light on the engine start button is flashing,and then press the engine start button unitl the engine is started.After the engine started,the red light on the engine start button is on
2.Turn off the engine:
1) Press the engine start button 2S and the engine is off;
2 ) Depress the brake and press the engine start button about 1S and the engine is off.
3.Turn on ACC/ON:
Unlock the car(without depressing the brake),press the engine start button once,ACC is turned on and the green light on the engine start button is on,Under ACC status,press the engine start button again,the car is into ON status and the orange light on the engine start button is on.Under ON status,press the engine start button again and all lights on the engine start button are off.
4.Remote start the engine :
The handbrake must be pulled to its full strength and operate the car original remote controller in order as below:LOCK-UNLOCK-LOCK-UNLOCK-LOCK,the engine is started and the red light on the engine start button is on.Must operate the remote controller in order as above,otherwise the engine can't be started. If failed to start the engine once,more 2 times can be tried.
5.Start the engine without depressing the brake:
If the brake switch doesn't work,press the engine start button in order as below:ACC-ON-OFF-ACC-ON-OFF,and then press the engine start button for 3S to start the engine.
💡 Important Note
We highly value your shopping experience and will do our best to assist with any installation-related problems. However, to ensure fair transactions, we cannot accept malicious refund requests caused by improper installation operations (e.g., failing to check the manual or contact customer service first) and using “installation issues” as an excuse. Thank you for your understanding and cooperation!
