PASS-CODE Calculator for Toyota, Lexus, Scion
PASS-CODE Calculator used for programming keys for T-oyota, L-exus and S-cion models. Avaliable for programming used or new keys and smart-keys. Also used for Smart Code Resetting. You can use T-oyota Techstream software and any OEM hardware compatible interface. This item allows you use factory procedure for programmong keys without online-service.
PASS-CODE Calculator works ONLY with USB-Key.
The reasons to buy passcode :
1.passcode Techstream keygen v3.8 support techstream 18.00.008 the lastest software for toyota.(2023)
2.Techstream keygen v3.8 support many versions techstream.
3.PASS-CODE Calculatror support smart keys passcode calculate.
Instructions how to update PASS-CODE Calculatror
1. Connect USB-key to USB port.
2. Run LMRU.EXE
3. Select “Remote Update System”
4. Open file “Update_X_X.rux”
5. Waiting untill the message “Uploading the file successfully”
6. Now you can use new version of software 🙂
—IMPORTANT—
Pass-Code Calculator with USB-key is ONLY for personal using.
If you will use it in commerce (for example, receiving payment for calculation) or for illegal action, your USB-key will be blocked beyond recovery.
Note:seed number Calculator just support 96 words!
Instructions how to use Techstream keygen
1.Open you techstream 18.00.008 software ,copy the software ID.
2.insert the passcode dongle ,and paste the software ID into techstream keygen v3.8 .Then click calculate,you will gen the Registration keys.
copy the right keys !
3.Paste the keys into new key,then click ok.done !
4.connect your cable ,install the right hardware driver ,then click the connect to vehicle button .done !
Instructions how to use PASS-CODE Calculatror
Smart Code Reset:
1. Connect to the vehicle:
2. Select Division, Model, Year, Engine and specify Options :
3. Select ECU Smart Key for Smart resetting:
4. Click for Utility :
5. Then choose Smart Code Reset in Utility Selection Menu :
6. Make sure driver door is open. Other doors must be closed. Don’t touch steering wheel and pedal.
ATTENTION!Smart Code Reset utility will erase all smart codes in vehicle!
7. Click Pass-Code button and copy Seed Number to clipboard. Not need to
use for T-oyota Online.
8. Open PASS-CODE Calculator. Paste VIN vehicle, Seed Number and press
Calculate. You will getPass-Code Number. PastePass-Code, click “Next”
and confirm:
9.Smart Code Resetwill start. Wait for16 Minutesfor Smart Resetting. Then
use one of the T-oyota factory procedure for programming keys.
Smart-Key Programming procedure:
(Example, when ID Code Box and Smart ECU had replaced. Smart Code
Reset must be performed!)
1. Select Smart Code Registration in Utility Selection Menu and press Next :
2. Choose third point and press Next:
3. Program keys. To register key touch the Power/Engine Switch with the key
you will hear a signal, and then move the key to the center of car cabin
you will hear a signal once again. To register second, third key, etc. just
repeat “touch and move” operations. You have 30 seconds to do this.
4. Smart Code Registration is complete.
Supported software versions for Toyota Techstream:
Techstream17.30.011NEW!!!
Techstream17.10.012
Techstream13.20.017
Techstream 13.10.019
Techstream 13.00.022
Techstream 12.30.017
Techstream 12.20.024
Techstream 12.10.019
Techstream 12.00.127
Techstream 12.00.125
Techstream 12.00.124
Techstream 11.30.137
Techstream 11.30.124
Techstream 11.30.037
Techstream 11.30.024
Techstream 11.20.019
Techstream 11.10.034
Techstream 11.00.019
Techstream 11.00.017
Techstream 10.30.029
Techstream 10.30.025
Techstream 10.20.030
Techstream 10.10.018
Techstream 10.00.028
Techstream 9.31.000
Techstream 9.30.029
Techstream 9.30.002
Techstream 9.20.022
Techstream 9.20.021
Techstream 9.10.038
Techstream 9.10.037
Techstream 9.00.026
Techstream 9.00.025
Techstream 8.30.023
Techstream 8.20.019
Techstream 8.11.006
Techstream 8.10.021
Techstream 8.00.034
