Specification:(One PC)
NOTE:
One PC AC Output is 100/105/110Vac(Settable)
“208/240Vac AC Output” need 2 PCS(at least) In Parallel. Maximum number of parallel connections is 6 units.
Features:
【Pure Sine Wave All-in-One Inverter】5000W DC 48V hybrid solar inverter, 120/208V/240Vac Output pure sine wave inverter( single-phase,split Phase and three-phase ), Built-in 100A MPPT solar charge controller,Max.PV Power：5500W, Max.PV Input VOC: 500V DC, Max PV Charging Current: 100A , support 48V Lead acid or lithium battery or batteryless mode; support Parallel up to 6 inverters.
【Peak-Valley Electricity Tariff】Through sectional charging/discharge function, users can freely set the battery discharge time or mains charging time within the rangeof 00:00 to 23:59(3 definable periods) according to your local electricity tariff standards; BT1ST Mode–Sectional Charging Function(Mains Charge); AC1ST Mode–Sectional Discharge Function(Battery Discharge).
【Intelligent Power Saving】Power saving mode available to reduce no-load loss, when the ECO mode is enabled, if the load is below 50W, the inverter output is delayed for 5 mins and then the output is turned off. When the hull switch is pressed to the “”OFF”” State, and then pressed to the “”ON”” State, the inverter will resume the output.
【4 Charge/ 2 Discharge Modes】Support 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging; mains bypass and inverter output two output mode, uninterrupted power supply; Anti-backflow grid connection function, support for use without battery, can be set up for on-grid power generation.
【Multiple Protection】Dual Cooling fan design,efficiently dissipate heat;Durable finish with high anti-corrosion,dust-proof design prevent dust from coming inside the inverter, prolong lifespan of the inverter; Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status, and complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.
Note:
Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
Link Diagram![]()
Split Phase Connect
Single Phase Connect
![]()
Three Phase Connect![]()
|
Technical Specifications |
|
|
Models
|
POW-SunSmart SP5K
|
|
AC Mode
|
|
|
Rated input voltage
|
110/120Vac
|
|
Frequency
|
50Hz/ 60Hz (Auto detection)
|
|
Overload/short circuit protection
|
Circuit breaker
|
|
Efficiency
|
>95%
|
|
AC reverse protection
|
Available
|
|
Maximum bypass overload current
|
63A
|
|
Inverter Mode
|
|
|
Output voltage waveform
|
Pure sine wave
|
|
Rated output power
|
5000VA
|
|
Rated output power
|
5000W
|
|
Power factor
|
1
|
|
Rated output voltage
|
120Vac Rated output voltage (100/105/110Vac Settable)
|
|
Maximum Efficiency
|
>92%
|
|
Peak power
|
10000VA
|
|
Loaded motor capability
|
4HP
|
|
Rated battery input voltage
|
48V (Minimum starting voltage 44V)
|
|
Battery voltage range
|
Undervoltage alarm/ shutdown voltage/ overvoltage alarm/
overvoltage recovery… settable on LCD screen
|
|
Power saving mode self-consumption
|
Load ≤ 50W
|
|
AC Output (Grid)
|
|
|
Rated Output Power
|
5000W
|
|
Max. apparent power
|
5000VA |
|
Max. output current
|
41.7A
|
|
Rated voltage
|
120Vac
|
|
AC Charging
|
|
|
Battery type
|
Lead acid or lithium battery
|
|
Maximum charge current (can be set)
|
0-40A
|
|
Charge voltage range
|
40–58Vdc
|
|
Circuit breaker specifications
|
63A
|
|
Overcharge protection
|
Alarm and turn off charging after 1 minute
|
|
PV Charging
|
|
|
Maximum PV open circuit voltage
|
500Vdc
|
|
PV operating voltage range
|
120-500Vdc
|
|
MPPT voltage range
|
120-450Vdc
|
|
Battery voltage range
|
40-60Vdc
|
|
Maximum PV input power
|
5500W
|
|
Maximum PV input current
|
22A
|
|
PV charging current range (can be set)
|
100A
|
|
Hybrid charging Max charger current specifications (AC charger + PV charger)
|
|
|
Max charger current(can be set)
|
100A
|
|
Certified Specifications
|
|
|
Certification
|
CE(IEC62109-1)
|
|
EMC certification level
|
EN61000
|
|
Operating temperature range
|
-10°C ~ 55°C
|
|
Storage temperature range
|
-25°C ~ 60°C
|
|
Noise
|
≤60dB
|
|
Heat dissipation
|
Forced air cooling, variable speed of fan
|
|
Communication interface
|
USB/RS485(WiFi/GPRS)/Dry contact control
|
4 GREAT REASONS TO BUY FROM US:
- Over 37,000 happy customers worldwide
- Real people on our support team ready to help
- The finest materials and stunning design — all our products are developed with an obsessive dedication to quality, durability, and functionality
- We use the most secure online ordering systems on the market, and are constantly improving our software to make sure we offer the highest possible security
BUY WITH CONFIDENCE
Our mission is to make your shopping experience as safe and enjoyable as possible. Have questions? Feel free to contact our award-winning customer care team for advice on everything from product specifications to order tracking.
- Money back guarantee: Something not quite right? If you’re not totally satisfied with your purchase, you can return it within 15 days for a full refund
- Risk-Free Purchase: We utilize industry-standard Secure Sockets Layer (SSL) technology to allow for the encryption of all the sensitive information, so you can be sure your details are completely safe with us
- Trustworthy payment method: We partner with the most popular online payment solutions that guarantee enhanced security and fast transaction processing
